You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Sampled Copies of Scalar PVs

We will have both a 10Hz BSA slot and a 1Hz BSA slot for operator tuning.

BSA PV Descriptions

PV NamePV Description

BLEN:$(AREA):$(POS):SUMHST0 ... SUMHST63
BLEN:$(AREA):$(POS):SUMCNTHST0 ... SUMCNTHST63
BLEN:$(AREA):$(POS):SUMRMSHST0 ... SUMRMSHST63
BLEN:$(AREA):$(POS):SUMPIDUHST0 ... SUMPIDUHST63
BLEN:$(AREA):$(POS):SUMPIDLHST0 ... SUMPIDLHST63

Raw power
  Count
  RMS deviation
  Pulse ID (upper 32 bits)
  Pulse ID (lower 32 bits)

BLEN:$(AREA):$(POS):IMAXHST0 ... IMAXHST63
BLEN:$(AREA):$(POS):IMAXCNTHST0 ... IMAXCNTHST63
BLEN:$(AREA):$(POS):IMAXRMSHST0 ... IMAXRMSHST63
BLEN:$(AREA):$(POS):IMAXPIDUHST0 ... IMAXPIDUHST63
BLEN:$(AREA):$(POS):IMAXPIDLHST0 ... IMAXPIDLHST63

Bunch length
  Count
  RMS deviation
  Pulse ID (upper 32 bits)
  Pulse ID (lower 32 bits)

BLEN:$(AREA):$(POS):TMITHST0 ... TMITHST63Transmitted intensity (scaled)
BLEN:$(AREA):$(POS):IMAXFLOATHST0 ... IMAXFLOATHST63Bunch length (floating point)
BLEN:$(AREA):$(POS):SUMFLOATHST0 ... SUMFLOATHST63Raw power (floating point)
BLEN:$(AREA):$(POS):BLSTATUSHST0 ... BLSTATUSHST63BLEN Status:
  b31: 1 if error happened
  b30: 1 if in calibration mode
  b29: 0 if ADC disabled
  If b31=1, b30=1, or b29=0, all other BSA PVs for the device will be marked "Invalid"

IMAX Scaling Factor

AppTypeLocation

IMAX Scaling Factor

0 = Pyro0 = BC164
0 = Pyro1 = BC28
1 = Gap diode0 = Injector1024
1 = Gap diode1 = BC164
  • No labels