You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Daughter Board Requirements:

  • Board must fit into a 7.8cm (3.071") wide x 4.6cm (1.811") high x 10cm (3.937") deep cavity
  • Mounting hole requirements:
    •  4x non-plated mounting holes
      • 2x in-line ASIC
      • 2x in-line with mating connector (to stabilize)
  • Board Material:
    • FR4
    • same as CHESS1
  • Board Thickness:  
    • standard 1.6mm thickness
    • same as CHESS1 
  • Allow board components:
    • ASIC, capacitor (ceramic only) , wire bonds
  • Not allow board components:
    • Resistors, plastic/metal connectors
  • HV through the connector
  • ASIC-to-board epoxy material: 
    • Arldite
  • Wire bonds Material:
    • aluminum wedge wiring bonding
  • ASIC Thermal Management Plan:  
    • Needs to be able to add cold plate
       
    • Need to assign a mech. eng. to design the cold plate  (Action Item for Su Dong)
  • Board Connector:
    • Hard gold finger edge connector 
  • Able to test the daughter board before and after radiation without unsoldering/soldering any component:
    • Achieved via the edge connector
  • Only implement the high speed digital signals
    • Off load the test structure testing to the CHESS1 carrier board
      • No right side wiring bonding pads
    • Requires a different CHESS2 daughter card design for CHESS1 board
  • Place the chip 1mm from the edge of the board
  • Metal pad underneath to the chip?
    • If yes, what pontential?
  • Hole for laser from the backside?

Carrier Board Requirements:

  • Support full 3+1, Pair only, 1+Test chip configurations
  • Support cabling of the high speed digital, SACI control, LV power, and HV control to/from the daughter board
  • Socketed connector for an daughter card with an edge connector.
  • Flexible timing control for multi-chip operation
  • Interface to backend readout with just one SFP fiber link should be the most flexible generic form for evolution
    • Primarily PGP
    • Capable of supporting 1 GigE   
  • Generic control/data interface for compatibility with main backend readout schemes of RCE and NEXYS video
    • RCE via SFP
    • NEXY via SFP (and FMC???)

 

 

 

 

 

 

 

  • No labels