To obtain the source or binaries:
http://omniorb.sourceforge.net/
Building omniORB
This is just an example, always refer to the README files for the version you download to check to see if the instructions have changed.
- create a directory such as rh9_gcc32
- cd into that directory
- run configure, for example: ../configure --prefix=$myDir PYTHON=$GLAST_EXT/python/2.5.1/bin/python --disable-ipv6
- make
- make install
We provide the include and lib directories with our external distributions for GlastRelease.
Preparing to use the new omniORB in GlastRelease
Update IExternal/omniOrb's requirements file as necessary to point to the current set of OmniOrb libraries.
Regenerating files using omniidl
http://omniorb.sourceforge.net/omni41/omniORB/omniORB005.html
In our HepRepCorba package, we save two *.idl files: HepRep.idl and HepEventServer.idl. We use these as input to the omniidl binary that is created when we compile omniOrb. These files must be regenerated each time we upgrade our version of OmniOrb.
omniidl -bcxx -Wba HepRep.idl
producing
HepRep.hh HepRepSK.cc, and HepRepDynSK.cc
and
omniidl -bcxx HepEventServer.idl
The product is the files: HepEventServer.hh and HepEventServerSK.cc
Rebuild HepRepCorba
In the HepRepCorba cmt requirements file there is a line
#Set some OmniOrb env variables
#This is useful for debugging
set ORBtraceLevel 0
Documentation pertaining to this env variable is available here: http://omniorb.sourceforge.net/omni41/omniORB/omniORB004.html#toc20 
The following options control debugging trace output.
traceLevel
default = 1
omniORB can output tracing and diagnostic messages to the standard error stream. The following levels are defined:
|
|
level 0 |
critical errors only |
level 1 |
informational messages only |
level 2 |
configuration information and warnings |
level 5 |
notifications when server threads are created and communication endpoints are shutdown |
level 10 |
execution and exception traces |
level 25 |
trace each send or receive of a giop message |
level 30 |
dump up to 128 bytes of each giop message |
level 40 |
dump complete contents of each giop message |
The trace level is cumulative, so at level 40, all trace messages are output.
Troubleshooting
While upgrading to 4.1.0, ran into an error on Linux Unable to create an endpoint:
http://www.omniorb-support.com/pipermail/omniorb-list/2006-December/028267.html