Introduction

This project is a basic project demonstrating how to setup and configure a RCE project from scratch.

Requirements

Hardware Requirements

The following hardware is required for this example:

• 1x Cluster On Board (COB Version 8) with 1x Digital Processing Module (DPM Version 2) and with 1x Digital Timing Module (DTM Version 2)
• No Application Specific Rear Transition Module (RTM) required for this example project
• 1x Linux Server with either a secondary 1 GigE port or a secondary 10 GigE port

Setup and Configuration

Linux Server

**insert text here**

ATCA Crate

**insert text here**

ZYNQ SD Memory Card

**insert text here**

Firmware

**insert text here**

Software

**insert text here**

Building and Running

• Firmware

• Software