Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Slides from Takashi on checking Gaussian approximation with EGS simulation - link
Collimator scattering at JLab - link
NLCTA beam test slides from Pelle - link
Operation plan:
Foil thickness = 5:
I(pC)\Bias (V) |
180 |
250 |
350 |
400 |
450 |
500 |
---|---|---|---|---|---|---|
0.001 |
x |
x |
x |
x |
x |
x |
0.01 |
x |
|
x |
|
|
x |
0.1 |
x |
|
x |
|
|
x |
1.0 |
x |
|
x |
|
|
x |
10.0 |
x |
|
x |
|
|
x |
100 |
x |
|
x |
|
|
x |
highest possible |
x |
|
x |
|
|
x |
Time: 25x7min=175mins
IP address: 172.27.244.72
ttyS0: ibootbar
ttyUSB0: BK
ttyUSB1: keithley
1. old three-output
2. BK
3. keithley
4. PC
5. monitor
Serial: 115200 8N1
Common commands:
"get outlets" - list all outlets
"get outlet X" - list outlet X
"set outlet X on/off/cycle" - turn on/off/cycle outlet list outlet X
Manual
Serial: 9600 8N1
Common commands:
"measure?" - returns [voltage, current, ]
"source:voltage?" - returns voltage
"source:voltage 10" - set to 10 V
"output on" - output on
"output?" - returns 1 for on, 0 for off
"source:voltage:range up/down" - change range for voltage setting
Manual
Serial:
Common commands:
"SOUT000" - enable output
"SOUT001" - disable output
"VOLT00XY.Z" - sets voltage to XY.Z Volts
460V-5.2uA (minutes to get down that low and still decreasing)
500V-5.7uA-3.6uA (20mins)