You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

ATLAS TDAQ Acronyms

This is a compilation of acronyms frequently used in the ATLAS Trigger and Data Acquisition systems. The list emerged from listening to the presentations during the ATLAS TDAQ week at CERN, May 15-19, 2006. It is made up of the acronyms that were most commonly used. It is neither complete nor necessarily 100% correct. For a more comprehensive list, see the ATLAS TDAQ Glossary compiled by Marc Dobson from which this heavily draws.

TDAQ

Trigger/Data Acquisition

ROS

Read-Out System - A sub-system of the ATLAS TDAQ responsible for reading out the ATLAS RODs and for supplying event fragments to the LVL2 and EB sub-systems.

ROB

Read-Out Buffer - Standard module which receives data from on or more RODs, stores them and makes them available to the LVL2 trigger processors and, for LVL2-selected events, to the EB. Data are stored during the LVL2 build time and for selected events until the Event is built inthe EB.

ROBIN

Read-Out Buffer Input Stage

ROD

Read-Out Driver - The detector specific Front-End Functional element which gathers data from the derandomizers over one or more data streams and builds ROD fragments of events to be sent to the ROS or RoIB.

ROL

Read-Out Link - The physical link between ROD and ROS through which the data are sent at the event rate of the LVL1 trigger.

ROC

Read-Out Crate - The combined functionality of the LDAQ, TRG, EBIF and one or more ROBs.

RoI

Region of Interest - A region limited in eta and phi, indicated by the LVL1 trigger to contain candidates for objects requiring further computation. In the case of B-physics triggers at low luminosity, some ROI's may be defined internally within the level-2 trigger system.

RoIB

Region of Interest Builder - The element which combines RoI information from different parts of LVL1 and forwards it to a LVL2 supervisor.

L2PU

Level 2 Processing Unit - The L2PU is the application running on one of the Level-2 processors, hosting the HLT processing algorithms and also incorporating the calculations from which the LVL2 trigger decision is derived.

L2SV

Level 2 Supervisor - The L2SV is the interface to the LVL1 system via the RoI Builder. It is responsible for distributing events to the LVL2 farm/subfarms and manages the computing resources by means of load balancing algorithms. L2SV computes the final LVL2 decision on an event based on the result from the LVL2 Processing Unit. The decision results are communicated to the DataFlow Manager (DFM) so that accepted events can be further analyzed, and rejected events can be flushed from the Read-Out System memory.

DFM

Data Flow Manager - The DFM orchestrates the correct flow of data fragments between ROSs and SFIs. It is triggered by the L2SV, load balances the event building tasks on the SFIs and ensures that the ROSs do not overflow their internal memory buffers.

SFI

Sub-Farm Input - Part of the data collection sub-system. The location where full event are built by the EB.

SFO

Sub-Farm Output - Part of the data collection which outputs to mass storage the complete events received from the EF.

LVL1

Level 1 Trigger - The ATLAS First Level Trigger system provides a hardware based first trigger decision using only a sub-set of an event's data (Calorimeter and Muon only).

Level 1 Calorimeter Trigger

SL

Sector Logic

PPM

Preprocessor Module

CPM

Cluster Processor Module

JEM

Jet/Energy Module

CMM

Common Merger Module

HLT

High Level Trigger - Comprised of both the LVL2 and EF, the two ATLAS trigger levels that are implemented primarily in software.

LVL2

Level 2 Trigger - The ATLAS Second Level Trigger system provides a software based second stage trigger decision, to reduce the rate of triggers from LVL1 by about a factor of 100. It uses 'Regions of Interest' (RoI) as given by the LVL1 trigger to selectively read out only certain parts of the ATLAS detector hardware and computes a LVL2 trigger decision.

EF

Event Filter - The hardware and software required for the final stage of the on-line event selection, data monitoring and calibration using offline style algorithms operating on complete events accepted by LVL2.

PESA

Physics Event Selection Architecture

DCS

Detector Control System

LVPS
TTC

Timing, Trigger and Control - Standard system which allows the distribution of timing, trigger and control signals. The system delivers the standard TTC signals such as the LHC clock, L1A and Fast Controls, and provides for the distribution of other detector-specific commands and data.

LTP
MRS

Message Reporting System - Facility which allows all software components in the ATLAS TDAQ system to report error messages to other components.

DDC

DCS to DAQ Communication

CTP

Central Trigger Processor - The component that generates the LVL1 Trigger

MUCTPI

Muon to CTP Interface

OKS

Object Kernel Support - Package which provides a simple active persistent in-memory object manager which is used to implement run-time configuration databases.

Detector

Muon System

MDT

Monitored Drift Tube

RPC

Resitive Plate Chamber

TGC

Thin Gap Chamber

ID

Inner Detector

SCT

Semiconductor Tracker

TRD

Transition Radiation Detector

Areas

UX15

Underground experimental area 15 (ATLAS cavern)

USA15

Underground services area 15 (ATLAS electronics cavern)

  • No labels