Table of Contents
Overview
The FACET facility of controlled by the legacy VMS control system, with new EPICS controls for some systems. This is a basic FACET control system physics development guide.
confluence test area:
test
test2
Logging into the FACET control system network
The FACET EPICS control system resides on its own MCC-based network, parallel to and separate from the LCLS network. The directory structures have a parallel naming convention:
- LCLS: /usr/local/lcls
- FACET: /usr/local/facet
To log into the FACET network from a linux terminal session:
- Account setup:
- Your afs unix account must be added to the facet group. Contact Ken Brobeck (x2558).
- You will be logging into the facet network as the shared fphysics account user. If you will be using matlab, you can have Mike Zelazny (x3673) set you up with an optional user-specific directory and environment under fphysics.
- Log into the mcclogin machine with your afs account:
- ssh mcclogin
- Then, from mcclogin, log into facet-builder as the fphysics account, for example:
- ssh fphysics@mcclogin
- When prompted, enter your user number, or 0 if you don't have one.
To log into the FACET network from an OPI in MCC:
- Click the ..... icon on the desktop.
FACET edm displays: facethome
facethome is the toplevel display for the FACET accelerator. It is similar to lclshome, a grid showing all areas and subsystems, with clickability into the various displays.
To run facethome from a terminal session on the facet network (see above) enter:
- enter facethome at the command prompt
To run facethome from a an MCC opi:
- click the ... icon on the screen
SCP
To run a SCP from a terminal session window:
- you will need a login to MCC. Please contact Ken Brobeck (x2558)
- from your afs account on mcclogin, log into mcc and run the scp:
- ssh mcc
- scp xt username
- e.g. scp xt jrock
To run a SCP from facethome:
- click the "SCP..." button