2.5.1
These are instructions for building Python 2.5.1 for the various OSes supported.
tiger-i386-32bit
These instructions should be performed as the glastrm user on the machine bldmac01 (accessible only from within SLAC).
- Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
- Ungzip and Untar the file Python-2.5.1.tgz
- Change directory to Python-2.5.1
- Set the environment variable EXTRA_CFLAGS to "-fno-common"
- Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40 --enable-unicode=ucs2
- Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
- Execute make
- Execute make install
- Leave and erase the current directory (Python-2.5.1)
Additional Python Modules
These modules should additionally be installed into python.
NumPy - 1.2.0
- Download numpy-1.2.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
- Extract numpy-1.2.0.tar.gz
- Change directory to numpy-1.2.0
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install
- Leave and erase the current directory (numpy-1.2.0)
PyFITS - 1.3
- Download pyfits-1.3.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-1.3.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
- Extract pyfits-1.3.tar.gz
- Change directory to pyfits-1.3
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install
- Leave and erase pyfits-1.3
4Suite XML - 1.0.2
- Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
- Extract 4Suite-XML-1.0.2.tar.gz
- Change directory to 4Suite-XML-1.0.2
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40
- Leave and erase 4Suite-XML-1.0.2
2.5.1-gl4
These are the instructions to build python 2.5.1-gl4 on the various supported platforms
tiger-i386-32bit-gcc40
These instructions should be performed as the glastrm user on the machine bldmac01 (accessible only from within SLAC).
- Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
- Ungzip and Untar the file Python-2.5.1.tgz
- Change directory to Python-2.5.1
- Set the environment variable EXTRA_CFLAGS to "-fno-common"
- Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40 --enable-unicode=ucs2
- Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
- Execute make
- Execute make install
- Leave and erase the current directory (Python-2.5.1)
Additional Python Modules
These modules should additionally be installed into python.
NumPy - 1.2.0
- Download numpy-1.2.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
- Extract numpy-1.2.0.tar.gz
- Change directory to numpy-1.2.0
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
- Leave and erase the current directory (numpy-1.2.0)
PyFITS - 2.1.1
- Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
- Extract pyfits-2.1.1.tar.gz
- Change directory to pyfits-2.1.1
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
- Leave and erase pyfits-2.1.1
4Suite XML - 1.0.2
- Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
- Extract 4Suite-XML-1.0.2.tar.gz
- Change directory to 4Suite-XML-1.0.2
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40
- Leave and erase 4Suite-XML-1.0.2
iPython - 0.10
- Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
- Extract ipython-0.10.tar.gz
- Change directory to ipython-0.10
- Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
- Leave and erase ipython-0.10
redhat5-i686-64bit-gcc41
These instructions should be performed as the glastrm user
- Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc41/python if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-64bit-gcc41/python
- Ungzip and Untar the file Python-2.5.1.tgz
- Change directory to Python-2.5.1
- Set the environment variable EXTRA_CFLAGS to "-fPIC"
- Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-64bit-gcc41/python/2.5.1-gl4/gcc41
- Execute make
- Execute make install
- Leave and erase the current directory (Python-2.5.1)
2.5.1-gl5
redhat5-i686-64bit-gcc41
These are instructions for building Python 2.5.1 for the various OSes supported.
These instructions should be performed as the glastrm user
- Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc41/python if it doesn't already exist.
- Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
- Ungzip and Untar the file Python-2.5.1.tgz
- Change directory to Python-2.5.1
- Set the environment variable EXTRA_CFLAGS to "-fPIC"
- Execute ./configure --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34
- Execute make
- Execute make install
- Leave and erase the current directory (Python-2.5.1)
Additional Python Modules
These modules should additionally be installed into python.
NumPy - 1.4.0
- Download numpy-1.4.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
- Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
- Extract numpy-1.4.0.tar.gz
- Change directory to numpy-1.4.0
- Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
- Leave and erase the current directory (numpy-1.4.0)
PyFITS - 2.1.1
- Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
- Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
- Extract pyfits-2.1.1.tar.gz
- Change directory to pyfits-2.1.1
- Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
- Leave and erase pyfits-2.1.1
matplotlib 0.99
- Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
- Extract matplotlib-0.99.1.tar.gz
- Change directory to matplotlib-0.99.1/
- setenv DISPLAY localhost:0.0
- xhost +
- Change setup.cfg set tkagg = False , wxagg = False, macosx = False
- Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py build
- Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
- Leave and erase matplotlib-0.99.1/