Bugs and Robustness

Issue	Person	Priority	Status
Modify DAQ to write image data to "RAM disk"		High
Calculate how much space on disk is required		High
Install 10G switch and NAS in S10		High
Check what happens if new DAQ is started before old one is finished (failed abort)		High
Fix binning and ROI for CMOS cameras		Medium
Can't get magnet values on first DAQ?		Medium
Check that the beam rate is not equal zero if rate set to "BEAM"	Spencer	Medium
Fix "Use_PV" functionality.	Sharon	Medium	DONE
Fix camera triggers if DAQ fails.	Sharon	High	DONE
"Fix cameras" button disabled if DAQ hasnt run yet	Sharon	Medium	DONE
"Fix cameras" button should use default values? - yes	Sharon	Medium	DONE
Timestamping fails on certain ROI settings?	Spencer	High	DONE
Upgrade all machines in S20 to 10G connection	Spencer	Medium	DONE
Camera binning messes up pulse ID finding	Spencer	Medium	DONE

Feature requests

Issue	Person	Priority	Status
Add nonBSA arrays so we can get UV spectrometer (Claudio request)	Person	High
DAQ Monitor GUI	Sharon	High	In Progress
Find a way to globally trigger a modifier bit (e.g. "DUMP_2_9").	David
Scan function that pauses until you click 'ok'
Generate "camera config" file including trigger info and add a save/restore button. Monitor if this finished ok or not.	Sharon
Load/Save Config files. Default config files.	Claire
Robustness issues. . .	Spencer	High	In progress
DAN features	Sharon
Documentation/commenting	Spencer	High	In progress
Fix "Use_PV" functionality.	Sharon	Medium	DONE

For now, the main references on the DAQ are these attached PDFs from IBIC 2021.

Main screen → Profile Monitor → LI20 → FACET DAQ (green button)

Wait for a bit after pressing the FACET DAQ button.

Main screen → Profile Monitor → LI20 → DAQ Camera Status

Indicator lamps light up when a camera is being used by the DAQ, and the "Shots Recorded" field updates as the DAQ runs