Motor Configuration
| Stage | IOC | PV | Cabling | Status |
|---|---|---|---|---|
| Newport UTS150PPV6 | ioc-mec-ppl-xps2 | MEC:PPL:MMN:13 | Standard Newport connection from mcn-mec-tch2. | Working |
Micos 6237-C002 Linear Stage, 40mm travel, HV, VSS-42 motor, 16:1 VPGL gear | ioc-mec-usrppl-ims | MEC:USR:MMS:25 (formerly XTCS Rotation) | PR60 Patch Panel - DB9 Flange Connection "#4" - Stage Note: Not connecting DB9 with limit switch infomation) | Not working, pmgr configuration under investigation. Reference: https://www.pi-usa.us/en/products/precision-motorized-linear-stages |
| Micronix VT-50-12316 | ioc-mec-usrppl-ims | MEC:USR:MMS:20 (formerly XTCS Filter Wheel) | PR60 Patch Panel - DB15 Flange Connection "2" - Stage | Not working using pmgr configuration "MEC VT50 1" |
Detector Configuration
| Detector | DAQ Host | DAQ Configuration | Cabling |
|---|---|---|---|
| Epix10kaQuad0 | daq-mec-pgp02 | -i 0 -P 0x10 -R 0 -D 0x1760 | Host card 0 - (via overhead cable tray) - back of PR60 - PR60 patch panel - Flange - - Detector |
| Epix10kaQuad1 | daq-mec-pgp02 | -i 1 -P 0x20 -R 0 -D 0x1760 | Host card 0 - (via overhead cable tray) - back of PR60 - PR60 patch panel - Flange - - Detector |
| Epix10kaQuad2 | daq-mec-pgp02 | -i 2 -P 0x11 -R 0 -D 0x1760 | Host card 1- (via overhead cable tray - back of PR60 - PR60 patch panel - Flange - Detector |
| Epix10kaQuad3 | daq-mec-pgp02 | -i 3 -P 0x21 -R 0 -D 0x1760 | Host card 0 - (via overhead cable tray) - back of PR60 - PR60 patch panel - Flange - Detector |
| epix100a_1_XTCS | daq-mec-cam01 | -i 1 -P 0x20 -G -T -R 0 -D 0x1770 | Host card 0 - R60 E33 RHS patch panel (connection #3) - (via overhead cable tray) back of PR60 - PR60 patch panel - Test Flange - Detector |
Von Hamos Configuration
TBD