You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The basic setup was done with internet access. 
  • Install CentOS 7 (Minimal Compute Node and Development Tools)
  • Add an user named "beam"
  • Disable selinux by editing /etc/selinux/config and setting SELINUX=disabled
  • Disable firewall by running: systemctl disable firewalld && systemctl stop firewalld

Installation of additional packages needed to compile the EUDAQ software

EUDAQ requires gcc version 4.9 or higher. Installation of gcc 7 from devtoolset-7

yum install centos-release-scl
yum-config-manager --enable rhel-server-rhscl-7-rpms
yum install devtoolset-7

Install ROOT and cmake3 from EPEL 7

yum install epel-release
yum-config-manager --enable epel
yum install root
yum install cmake3

Additional packages needed for EUDAQ

 yum install libusb-devel

 yum install qt5-qtbase-dev

Other useful packages (sshfs = user space ssh filesystem, emacs, etc.)

yum install sshfs emacs

The server box has two ethernet ports. One is used to connect to the restricted ESA network, the second port to connect to a private RCE network.

Configuration of the ESA NIC (edit /etc/sysconfig/network-scripts/ifcfg-enp2s0)

TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME=enp2s0
UUID=a1104b8c-87b0-4867-b7df-9eca4bb605b2
DEVICE=enp2s0
ONBOOT=yes
IPADDR=172.27.104.45
PREFIX=22
GATEWAY=172.27.104.1

Configuration of the RCE NIC (edit  /etc/sysconfig/network-scripts/ifcfg-enp3s0)

TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME=enp3s0
UUID=7689a12c-c8f6-43af-9d42-062a5e4967a2
DEVICE=enp3s0
ONBOOT=yes
IPADDR=192.168.1.1
PREFIX=24

Install and configure a dhcp server for the RCE network

yum install dhcp

systemctl start dhcpd
systemctl enable dhcpd

Edit /etc/dhcp/dhcpd.conf

subnet 192.168.1.0 netmask 255.255.255.0 {
  host rce0 { 
    hardware ethernet 08:00:56:00:45:10 ;
    fixed-address 192.168.1.10;
  }
  host rce1 {
    hardware ethernet 08:00:56:00:45:00;
    fixed-address 192.168.1.11;
  }
  host rce2 {
    hardware ethernet 08:00:56:00:46:21;
    fixed-address 192.168.1.12;
  }
}

Append RCE defintions to /etc/hosts

192.168.1.10 rce0
192.168.1.11 rce1
192.168.1.12 rce2

To allow updates in the restricted network yum needs to be configured to use a SOCKS5 proxy.

(Recipe for ssh tunnel for the SOCK5 proxy need to be defined/tested for ESA)

Edit /etc/yum.conf and add the line below to the "main" section:

proxy=socks5h://localhost:1080

 

Compiling EUDAQ. This recipe assumes internet access and needs to be revised for the ESA restricted network

As user "beam" run

git clone -b v1.7.0 https://github.com/eudaq/eudaq.git

mkdir /home/beam/afs

#use sshfs to mount AFS

sshfs slac_user_name@slac_host_with_afs:/afs afs

cp -r /afs/desy.de/group/telescopes/tlu/tlufirmware .

cp -r /home/beam/afs/desy.de/group/telescopes/tlu/tlufirmware .

cd /home/beam/eudaq/build

cmake3 ..

make

 

 

  • No labels