Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Log into 'clonioc4' (requires access through gateway).
ssh hallgw ssh clonioc4 cd /usr/clas12/hps/dev/ source .setup-hps
Start GUIs
cd utils ./start_svt_guis.sh
Once the GUI's are up, the FEB's should be powered first, followed by the flange cards.
Log into 'clonioc1' (requires access through gateway).
ssh hallgw ssh clonioc4 cd /usr/clas12/hps/dev/ source .setup-hps
Control IOCs (if not running!):
cd utils # get status|start|stop python ./control_svt_dpm.py -a status|start|stop [-t for testing] # you can also give args for specific nodes: # Control DPM IOC only: python ./control_svt_dpm.py -a status|start|stop controldpm # Data DPM "X" (0-13) IOC only: python ./control_svt_dpm.py -a status|start|stop dpmX # DTM "X" (0-1) IOC only: python ./control_svt_dpm.py -a status|start|stop dtmX # to monitor the stdout in xterms ./start_svt_mon.py
Note: if you get "permission denied" above try to login as user=epics (default password) and try again.
If everything fails try to use the below running as user=epics:
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop
If that fails, call Pelle.
NOT USED FOR THE MOMENT
Access IOC from clonioc1:
telnet localhost 20006 # iochvCaen telnet localhost 20007 # iocsvtDaq
Control IOC from clonioc1:
Ctrl+] to exit #(type quit in terminal) Ctrl+x to reboot
ProcServer commands
The path has to be included to override the production default. So it's a bit cumbersome, but you can put the lines in a local script.
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq stop procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq start procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq status # show all iocs procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status
Development tree on clonioc1:
cd /usr/clas12/hps/dev # contains: # apps/hvCaenApp, apps/iocBoot/iochvCaen # apps/svtDaqApp, apps/iocBoot/iocsvtDaq # drivers/LVMPOD