Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Log into 'clonioc1' (requires access through gateway).
ssh hallgw ssh clonioc1
Start GUIs
cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./start_svt_guis.sh
Once the GUI's are up, the FEB's should be powered first, followed by the flange cards.
Log into 'clonioc1' (requires access through gateway).
ssh hallgw ssh clonioc1
Start IOCs:
cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./start_dpm.py
NOT USED FOR THE MOMENT
Access IOC from clonioc1:
telnet localhost 20006 # iochvCaen telnet localhost 20007 # iocsvtDaq
Control IOC from clonioc1:
Ctrl+] to exit #(type quit in terminal) Ctrl+x to reboot
ProcServer commands
The path has to be included to override the production default. So it's a bit cumbersome, but you can put the lines in a local script.
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq stop procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq start procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq status # show all iocs procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status
Development tree on clonioc1:
cd /usr/clas12/hps/dev # contains: # apps/hvCaenApp, apps/iocBoot/iochvCaen # apps/svtDaqApp, apps/iocBoot/iocsvtDaq # drivers/LVMPOD