...
Finally, the "-f" parameter indicates the name of the file (under /tftpboot on laci@lcls-dev1) containing the sequence of values to be loaded into memory.
It is set to /rtems/4.10.2/powerpc-rtems/beatnik/img/netboot.flashimg.bin for both production and development. Note that the mount for tftp is mapped to from the environment variable $TFTPBOOT on the development and production control systems. Therefore if you "cd $TFTPBOOT" the path following "-f" should exist.
| Panel |
|---|
On development for rtems 4.10.2: Host w/tftp server is lcls-dev1 MVME5500>tftpGet -c134.79.219.49 -s134.79.219.136 -g134.79.219.1 \
-m255.255.252.0 -f/rtems/4.10.2/powerpc-rtems/beatnik/img/netboot.flashimg.bin |
...
| Panel |
|---|
For MVME6100: Example: For a client that has an IP address 172.27.2.179: MVME6100> tftpGet -c172.27.2.179 -s172.27.8.28 -g172.27.0.1 -m255.255.252.0 -f/rtems/4.10.2/powerpc-rtems/beatnik/img/netboot.flashimg.bin
Network Loading from: /dev/enet0
Loading File: /rtems/4.10.2/powerpc-rtems/beatnik/img/netboot.flashimg.bin
Load Address: 006B7000
Download Buffer Size = 00200000 Client IP Address = 172.27.2.179
Server IP Address = 172.27.8.41
Gateway IP Address = 172.27.0.1
Subnet IP Address Mask = 255.255.252.0 Network File Load in Progress... Bytes Received =&780860, Bytes Loaded =&780860
Bytes/Second =&780860, Elapsed Time =1 Second(s)
MVME6100> |
...
| Panel |
|---|
Changing NVRAM configuration
Use '<Ctrl>-k' to go up to previous field
Use '<Ctrl>-r' to restore this field
Use '<Ctrl>-g' to quit+write NVRAM
Use '<Ctrl>-c' to quit+cancel (all values are restored)
Use '<Ctrl>-x' to reboot
Boot file (e.g., '/TFTP/1.2.3.4/path', '~rshuser/path' or 'nfshost:/dir:path'):
> afsnfs:/afs/slac:/package/rtems/4.10.2/target/rtems_p3/ssrlApps_p1p2/powerpc-rtems/beatnik/bin/rtems.ralf
Command line parameters:
> INIT=/boot/g/lcls/epics/iocCommon/ioc-b34-cd09/startup.cmd
Server IP: > 172.23.66.102
Gateway IP: > 134.79.219.1
My IP: > 134.79.219.49
My netmask: > 255.255.252.0
My name: > ioc-b34-cd09
My domain: > slac.stanford.edu
Loghost IP: >
DNS server 1: > 134.79.111.111
DNS server 2: > 134.79.111.112
DNS server 3: >
NTP server 1: > 134.79.110.75
NTP server 2: > 134.79.110.10
NTP server 3: > 134.79.110.9
Use BOOTP: Yes, No or Partial (-> file and
command line from NVRAM) Y-N-P > N
Autoboot Delay: 0_.30secs (0==forever) > 5
CPU Temp. Calibration - (LEAVE IF UNSURE) > NVRAM configuration updated |
...
| Panel |
|---|
Cexp> BSP_flashWriteEnable(0)
Cexp> BSP_flashWriteFile(0,0,"/boot/package/rtems/4.10.2/target/rtems_p3/ssrlApps_p1p2/powerpc-rtems/beatnik/img/netboot.flashimg.bin") |
...
