Page History

...

Changed interlock to work with dewpoint instead of RH need to validate that this is okay.

Testing Procedure

1. Checking the condition of the shipping and fill 
2. Visual inspection [take off the plastic cover for the module to have a clear photo]
   1. 1 overview photo and photos for each chip
3. Start dcs interlock Pi
   1. ssh pi@dcs-...
   2. cd ~/imagin
   3. python runAllInterlocks.py
4. Start 19v power to Pi
   1. Check that dummy light turns on. 
5. Start grafana
   1. http://atlascr.slac.stanford.edu:3000/d/31eiHlhSz/module_reception?orgId=1&from=now-5m&to=now
6. Turn Air
7.  Load Load module and connect power and data lines
8. Turn on vaccuum
9. Close box and check that dew point is lowering. 

Reception Test:

1. Checking the condition of the shipping and fill 
2. Visual inspection [take off the plastic cover for the module to have a clear photo]1 overview photo and photos for each chip