Page History

...

YARR document: https://yarr.web.cern.ch/yarr/install/

• if the yarr PC updated, it might change the driver. In that case you need to reinstall the driver

QC tools

gitlab link

itkdb v0.4.12

...

1. Start dcs interlock Pi
   
   1. ssh pi@dcs-...
   2. cd ~/imagin
   3. python runAllInterlocks.py
2. Start 19v power to Pi
   1. Check that dummy light turns on. 
3. Start grafana
   1. http://atlascr.slac.stanford.edu:3000/d/31eiHlhSz/module_reception?orgId=1&from=now-5m&to=now
4. Turn Air
5.  Load module and connect power and data lines
6. Turn on vaccuum
7. Close box and check that dew point is lowering. 

Reception Test:

1. Checking the condition of the shipping and fill 
2. Visual inspection [take off the plastic cover for the module to have a clear photo]
   1. 1 overview photo and photos for each chip