...
Monitoring of the temperature modules and interlock status is found on the three pi's. The rasberry pi computers can be remotely accessed at the following three locations
- dcs-lin-trp-1
- dcs-ring-trp-1
- dcs-pi-mod-03 (Note this one is for the quads)
When running you can the montoring at: http://atlascr.slac.stanford.edu:3000/d/31eiHlhSz/module_reception?orgId=1&from=now-5m&to=now
Changed interlock to work with dewpoint instead of RH need to validate that this is okay.
Testing Procedure
- Start dcs interlock Pi
- ssh pi@dcs-...
- cd ~/imagin
- python runAllInterlocks.py
- Start 19v power to Pi
- Check that dummy light turns on.
- Start grafana
- Turn Air
- Load module and connect power and data lines
- Turn on vaccuum
- Close box and check that dew point is lowering.