Page History

...

1. Checking the condition of the shipping and fill 
2. Visual inspection [take off the plastic cover for the module to have a clear photo]
   1. 1 overview photo and photos for each chip
3. Start dcs interlock Pi
   1. ssh pi@dcs-...
   2. cd ~/imagin
   3. python runAllInterlocks.py
4. Start 19v power to Pi
   1. Check that dummy light turns on. 
5. Start grafana
   1. http://atlascr.slac.stanford.edu:3000/d/31eiHlhSz/module_reception?orgId=1&from=now-5m&to=now
6. Turn Air
7. Load module and connect power and data lines
8. Turn on vacuum (the vacuum might have a problem when the sealing is bad between tube and the vacuum chuck)
   1. two thing you can do is to change the sealing
   2. change the requirement of the sealing (vacuum require) in the book)
9. Close box and check that dew point is lowering. 
10. turn on the chiller
11. turn on the pieltier (2.5V 1.2A)
12. power the module:
    1. I: 5.5A V:~2V
13. IV scan: use module-qc-tool
    1. https://pypi.org/project/module-qc-tools/#iv-measure
14. Electrical Test:
    1. run data transmission check first:
       1. python3 scripts/update_config.py -c connectivity file
       2. /bin/eyeDiagram -r configs/controller/specCfg-rd53b-4x4.json -c <connectivity_file>
    2. scan_all.py to run all the electrical test
       1. need to change the module and testing date

Image Added