Page History

Fiber:

• B2/#1,#2 
• PR60 E15 Middle #1 
• R62 E33 Right #2
• MTP to daq-mec-pgp02
  • rear
  • upper right side
  • left most fiber port

Power: B3/Quad 0

Details worked out with Detectors Group.

Fiber:

• B2/#7,#8
• PR60 E15 Middle #4 
• R62 E33 Right #2
• MTP to daq-mec-pgp02
  • rear
  • upper right side
  • left most fiber port

Power: B3/Quad 3

Fiber:

• B2/#7,#8
• PR60 E15 Middle #4 
• R62 E33 Right #2
• MTP to daq-mec-pgp02
  • rear
  • upper right side
  • left most fiber port

Power: B3/Quad 3

ePix100

(former bxrts)

Planned:Fiber pair from Flange D2d, power from the South epix-PDU feedthru on B3.

• MTP to daq-mec-cam01

ePix100

(former xpcs)

Planned: Fiber pair from Flange B2 Quad 2 (#5/#6), power from North epix-PDU feedthru on B3.

• MTP to daq-mec-cam01

in-air

USB/Fiber extender to daq-mec-cam02

Yes

Not tested right now since under regular use

Yes

Not tested right now since under regular use

PVs are:

• MEC:QADC:01:CH{0,1,2,3}

B3

ioc-mec-qadc.

Timing fiber connected.

Diode signal into A1 with SMA/Male - SSMC/Female Coaxial Jumper Cable and VLM-83-2W-S+ limiter.

Yes

(verify)