Page History

...

In 120 Hz operation, a difference in fiducials of 3 is expected. Some more detail can be found at the BLD DAQ page.

If data are not coming through, first check that the BLD source is properly selected in the DAQ partition.

...

Go to the EVR configuration (with the exception of pgp triggered devices as the EPIX), if you are using aliases in your DAQ, it should be straightforward to find the right trigger channel. Look at all available EVR cards. For the run trigger setting for e.g. CsPad /Cs140k detectors, it might be best to contact your POC.

...