Beam Alignemnt
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| DSHM | OTRS:LI20:3075:MOTR | -37200/-500 | in/out | ||
| FrontView | XPS:LI20:MC05 | Target Mount Horizontal | M2 | -65/-150 | in/out |
Ionizer/Shadowgraphy
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| Afterglow injector | XPS:LI20:MC01 | E12 Afterglow injector | M1 | +28 mm/ +4 mm/ -46 mm | Collision closest to PB/ Focus / collision furthest from PB |
| Shadowgraphy camera stage | XPS:LI20:MC02 | E14 Shadowgraphy Imaging | M1 | Moves the camera between MO and LFOV imaging | |
| Microscope objective | MOC-LI20-MC08 | PB28 MO Vertical Mover | CH3 | Picomotor, controls the MO |
Laser room
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| HeNe beam block | XPS:LA20:LS24 | Transport HeNe block | M3 | 10 mm/ 8 mm | in/out |
| CW beam block | XPS:LA20:LS24 | CW laser block | M5 | 0 mm/ 25 mm | in/out |
Main beam block
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| Main beam block | XPS:LI20:MC03 | C9 Compressor beam block | M3 | 299 mm/ 0mm | in/out |
E300
For sending laser to foil, equivalent of minimum transmission through main attenuator + RP attenuator in is needed.
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| USHM | XPS:LI20:MC03 | PB10 M2 Removal Stage | M1 |
0.5/42.5 | in/out (E320 position) |
| Axicon Vertical | XPS:LI20:MC04 | PB2 Lens Vertical | M2 | 0.9 mm | Axicon beam center overlaps with beam center |
| Axicon Horizontal | XPS:LI20:MC04 | PB3 Lens Horizontal | M3 | 10 mm | Axicon beam center overlaps with beam center |
| Axicon z | XPS:LI20:MC04 | PB1 Lens Z Position Stage | M1 | 0 | Position for Axicon |
E305
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| Axilens z | XPS:LI20:MC04 | PB1 Lens Z Position Stage | M1 | 20 | Position for Axilens |
| Axilens Vertical | XPS:LI20:MC04 | PB2 Lens Vertical | M2 | 0/100 in/out | Axicon beam center overlaps with beam center |
| Axilens Horizontal | XPS:LI20:MC04 | PB3 Lens Horizontal | M3 |
8.57 | Axicon beam center overlaps with beam center |
| USHM | XPS:LI20:MC03 | PB10 M2 Removal Stage | M1 |
3.5 mm / 44 mm 0.5/42.5 | in/out (E320 position) |
EOS
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| EOS removal | XPS:LI20:MC04 | PB4 EOS Assembly Removal | M4 | 10.7 mm/ 50mm | in/out |
Target assembly
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| Target Assembly Vertical | XPS:LI20:MC05 | PB7 Target Mount Vertical | M1 | 80 | Clear in combination with horizontal |
| Target Assembly Horizontal | XPS:LI20:MC05 | PB8 Target Mount Horizontal | M2 | -150 | Clear in combination with vertical |
E320 assembly
Motor positions after rejigging MO (height change): http://physics-elog.slac.stanford.edu/facetelog/show.jsp?dir=/2022/35/31.08&pos=2022-08-31T17:05:58
...