...
How to change rep rate or pulse duration
- Go to the EVR panel
- Select desired rep rate using the rear triggers section. The rear triggers and front triggers share the same rep rate (don't ask me why).
- Select the desired duration using the front triggers section. The rear triggers and front triggers have different duration controls (don't ask...).
- Set an appropriate delay- this is unknown right now. Might want to take a guess based on the laser delay time.
- Click enable for the front panel trigger to start pulsing.
- Click disable to stop pulsing.
- If you want 0.2 Hz... currently it needs some expertise to set up. Ask Christine...
Info |
---|
How to shut down after gas jet operation
- Close Fill valve
- Check the scroll pump at pen 20-12 is running and there are no manual valves closed...
- Open drain valve
- Close gas bottle valve
Info |
---|
Related articles
...