...
Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
---|---|---|---|---|---|
Target Assembly Vertical | XPS:LI20:MC05 | PB7 Target Mount Vertical | M1 | 80 | Clear in combination with horizontal |
Target Assembly Horizontal | XPS:LI20:MC05 | PB8 Target Mount Horizontal | M2 | -150 | Clear in combination with vertical |
E320 assembly
Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
---|---|---|---|---|---|
Alignment Target Vertical | XPS:LI20:MC10 | PB11 SFQED Target Vertical | M1 | 0/99 | Home position, needed when inserting or retracting OAP assembly. Do not drive to home (0) when MO tower is in IN position. /Clear position with and without OAP assembly. Moving assembly requires moving out of clear position. |
MO Tower Mover IN/OUT | XPS:LI20:MC10 | PB12 SFQED Tower Mover | M2 | 0 | Clear (retracted), also home position, needs to be done before retracting SFQED assembly |
OAP Assembly IN/OUT | XPS:LI20:MC10 | PB16 SFQED Assembly Removal | M3 | 0 | Clear (retracted), also home positions, needs MO Tower to move out first, also needs Alignment target to move upwards first |
Elliptical mirror/M3 IN/OUT | XPS:LI20:MC10 | PB17 Elliptical mirror mover | M4 | Need to check | |
PB18 Focus Imaging Vertical | XPS:LI20:MC10 | PB18 Focus Imaging Vertical | M5 | 0 | Home at current position (0). Motor should not be touched or moved, should be clear in any case. |
Safely retracting E320 assembly and setting up to clear e-beam/laser will be:
- Drive PB12 SFQED Tower Mover to 0 (home)
- Drive PB11 SFQED Target Vertical to 0 (home)
- Drive PB16 SFQED Assembly Removal to 0 (home)
- Drive PB11 SFQED Target Vertical to 99
- Drive PB17 Elliptical mirror mover to most (negative or positive??) end ← need to fill this one in