...
| PV Name | Purpose | Save/restore | Archive |
|---|---|---|---|
| $(P):Firmware | read firmware number | ||
| $(P):HeartBeat | read heartbeat | 10s | |
| $(P):HVStatus | read status of high voltage | 10s | |
| $(P):Temp | read temperature of chassis | 10s | |
| $(P):HVMonitor | high voltage reading (V) | 10s | |
| $(P):HVSetpt | high voltage setting (V) | yes | 10s |
| $(P):RackPosition | String to hold a description of the rack position | yes | |
| $(P):nn:DoseRate | read back of dose from GM tube nn (01-10) in mR/hr (close enough, it saturates about 20Rsaturation curve starts to roll over about 10R/hr - see curve plot below) | 1s | |
| $(P):nn:Position | string to hold a description of the position of GM tube number nn | yes | |
| $(P):Sequence | sequence to readout the PVs at 1 Hz. The SEQ record has a delay of 0.06 seconds between sending 1 to each PV's PROC field so commands don't collide in the cable |
...