...
|
---|
Shipment from CERN
...
The following items are listed by names and counts from each box of the entire package from CERN. For example, there are 6 POM base plates in total, but they came as sets of there in two separate boxes. Pictures will come soon.
- Data cables for triplets RD53a ITk Pixel (x3)
- POM base plates (x3)
- POM base plates (x3) + coldplates for triplets "linear type" (x3) + vacuum chucks (x3)
- Triplet adapter cards RD53a ITk Pixel (x6)
- Plastic screws: RENY; NYLON M3x35, M3x25, M3x40, washers (check count for all the items) + coldplates for triplets "ring type" (x3)
- Foam insulation sets: Linear type (x3), Ring type (x3), presumably Quad V0.4 (exact type is not labeled, actual purpose to be checked) (x2)Foam insulation parts
- 25m coolant tubes
- 5m dry air / vacuum tubes
- 4 RENY screws
- 20 disc springs
- Various washers and nylon screws
They're being shipped from CERN 12/11 https://edh.cern.ch/Document/8559982 together with the Triplet Cooling unit.
Some notes from Saverio:
-- M6 bolt are 10/32 - we need to find more here.
-- The coolant tube is slightly shorter
-- There are spares for all the screw types and the vacuum chucks rubber pads have been already cut
...
- Peltier devices (see the summary of this presentation for recommendations and page 13 for the list of alternatives): Module 1 and Module 2 (one of each per cooling unit).
- Panasonic EYGS0909ZLX2 TIM sheets (50cm2 sheets 4x4cm2 per cooling unit)
- Temperature sensors (NTC or PT100s, see assembly manual)
...