...
------------------------------------------------------
At the top of most of the timing db files you will find an edl file listed that
is associated with that db file. Here are the standard ones, the macros that
should be passed to each, and how to define those macros.
Trigger settings
Db file: *trig.db
EDL file: evnt_trig_*.edl to match hardware (PMC/VME, with/without transition board variations) evnt_trig_PMC_TTB.edl evnt_trig_PMC_noTTB.edl evnt_trig_VME_TTB.edl evnt_trig_VME_noTTB.edl
Macros: DEV, LOCA, UNIT, IOC, SYS
Macros are the same ones used with *trig.db. The default value for DEV is
TRIG:$(LOCA):$(UNIT). If the triggers in your EVR don't all have the same prefix
(TRIG:LOCA:UNIT or DEV), you can't use this screen. Copy the appropriate screen
and customize PV names, or use the display autogen approach.
The following will have all macros derived from the trigger screen macros when
launched from trigger screen using the "Experts" button:
evrPatternDiags.edl (Pattern.db)
evrDiags.edl (EvrPmc.db)
evrTriggerDiags.edl (EvrPmc.db)
BSA diagnostics
Db file: Bsa.db
EDL file: evnt_bsa_dev_edefs.edl
Macros:
DEV_BASE - the BSA data source prefix, e.g. BPMS:IN10:371, TRIG:B34:EV05
BSA - the name of the edef specific screen, e.g. evnt_bsa_dev, evnt_bsa_llrf...
The other macros depend on the screen specified as $(BSA). These are for evnt_bsa_dev:
DEV - prefix for the data source, generally $(DEV_BASE):
SECN - part of PV name defined as SECN, ATTR, or ATRB in the bsa db file, e.g. COUNTER
SYS - SYS0 etc.
...
