...

Dark files were obtained and deployed using Calibration Management Tool

exp=cxif5315:run=147  dark average, rms, and average difference between runs 147-198:

...

Geometry alignment

In accordance with CSPAD Alignment, use geometry file:

/reg/g/psdm/detector/alignment/cspad/calib-cxi-ds2-2015-01-20/calib/CsPad::CalibV1/CxiDs2.0:Cspad.0/geometry/1-end.data

...

Tuning of geometry can be done with  Detector alignment tool running command:

geo -i cspad-ndarr-ave-cxif5315-r0169.dat -g geo-cxif5315-r0169-swap-tuned.data

...

Using image array in cspad-ndarr-max-cxif5315-r0169.dat and geometry file geo-cxif5315-r0169-swap-tuned.data, one can generate masks using the Mask Editor embedded in Calibration Manager.

Run command calibman, select tab ROI and performing all steps of the mask creation procedure, one can draw ROI on image, create the mask for this image, convert this mask to ndarray, and use this ndarray for data processing. This ndarray can be used later for image reconstruction with the same geometry file.

...