Page History
...
Quality check
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20907 20908 -5 -5 -4 43540 43545 0 5 -0.00005 -0.00263 48302 48301 1 -1 -5 pair: 1 20904 20907 421 424 43538 43538 -203 -203 43538 43538 -203 -203 0.00970 0.55601 48299 48299 0 -3 0 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data
...
Quality check
Code Block |
---|
pair: S1 S2 dS1 dS2 L1S1 L2 dL1 dL2 <dS/L> angle(deg) D1S2 D2 dD d(dS) d(dL) pair: 0 20906 20905 -8 -9 43540 43540 3 3 -0.00020 -0.01119 48297 48299 -2 1 0 pair: 1 20908 20898 -12 -22 43541 43538 12 9 -0.00039 -0.02237 48299 48295 4 10 3 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.4/geometry/0-end.data
2013-02-13
CSPad2x2-5.txt Q022 D15A15
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/
calib-cspad2x2-05-2013-02-13/2013-02-13-CSPAD2X2-5-MEC-Metrology.txt
Quality check
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20904 20904 2 2 43536 43536 -1 -1 0.00005 0.00263 48294 48294 0 0 0 pair: 1 20908 20909 122 123 43540 43545 -61 -56 0.00281 0.16119 48302 48302 0 -1 -5 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20906 20905 -8 -9 43540 43540 3 3 -0.00020 -0.01119 48297 48299 -2 1 0 pair: 1 20908 20898 -12 -22 43541 43538 12 9 -0.00039 -0.02237 48299 48295 4 10 3 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-0504-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.54/geometry/0-end.data
2013-02-13
CSPad2x2-
...
5.txt
...
Q022 D15A15
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/
calib-cspad2x2-0605-2013-02-13/2013-02-13-CSPAD2X2-65-MEC-Metrology.txt
Quality check
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20903 20900 59 56 43541 43539 -27 -29 0.00132 0.07567 48296 48297 -1 3 2 pair: 1 20979 20977 49 47 43707 43705 -20 -22 0.00110 0.06292 48481 48477 4 2 2 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.0/geometry/0-end.data
2014-04-25-CSPAD2X2-3-MEC-Metrology.txt (1.0 SN07 D12A18)
...
20904 20904 2 2 43536 43536 -1 -1 0.00005 0.00263 48294 48294 0 0 0
pair: 1 20908 20909 122 123 43540 43545 -61 -56 0.00281 0.16119 48302 48302 0 -1 -5 |
Calibration file
calib-cspad2x2-0305-20142013-04-25/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt/reg/g/psdm/detector/alignment/cspad2x2/
Original metrology file from Gabriel Blaj: 2014-04-25-CSPAD2X2-3-MEC-Metrology.xlsx
This should be used for any experiment AFTER April 25th 2014 (until further notice).
Quality check
Code Block |
---|
Quality check in XY plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) segm: 0 20979 20982 0 3 -43695 -43689 -2 4 -0.00197 48468 48468 0 -3 -6 segm: 1 20981 20981 123 123 -43701 -43695 51 57 -0.16127 48478 48469 9 0 -6 Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) segm: 0 20980 -43692 43692 20980 18 5 -2 -15 11 -8 13 13 -8 11 -0.01049 0.03004 -13.001 segm: 1 20981 -43698 43698 20981 -4 -8 0 -4 -6 -2 4 4 -2 -6 -0.00262 -0.01639 -4.000 |
Calibration file
calib-cspad2x2-03-2014-04-25/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data/reg/g/psdm/detector/alignment/cspad2x2/
...
02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.5/geometry/0-end.data
2013-02-13
CSPad2x2-6.txt Q157
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/
calib-cspad2x2-06-2013-02-13/2013-02-13-CSPAD2X2-6-MEC-Metrology.txt
Quality check
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20903 20900 59 56 43541 43539 -27 -29 0.00132 0.07567 48296 48297 -1 3 2
pair: 1 20979 20977 49 47 43707 43705 -20 -22 0.00110 0.06292 48481 48477 4 2 2 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.0/geometry/0-end.data
2014-04-25-CSPAD2X2-3-MEC-Metrology.txt (1.0 SN07 D12A18)
Note from Gabriel and Philip
Note |
---|
Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5): - CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013. - CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further. - CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago). Thanks, Gabriel and Philip |
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-022015-04-02-CSPAD2X2-3-MEC-Metrology.txt
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.xlsx
Quality check
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/
calib-cspad2x2-03-2014-04-25/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt
Original metrology file from Gabriel Blaj: 2014-04-25-CSPAD2X2-3-MEC-Metrology.xlsx
This should be used for any experiment AFTER April 25th 2014 (until further notice).
Quality check
Code Block |
---|
Quality check in XY plane:
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
segm: 0 20979 20982 0 3 -43695 -43689 -2 4 -0.00197 48468 48468 0 -3 -6
segm: 1 20981 20981 123 123 -43701 -43695 51 57 -0.16127 48478 48469 9 0 -6
Quality check in Z:
segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um)
segm: 0 20980 -43692 43692 20980 18 5 -2 -15 11 -8 13 13 -8 11 -0.01049 0.03004 -13.001
segm: 1 20981 -43698 43698 20981 -4 -8 0 -4 -6 -2 4 4 -2 -6 -0.00262 -0.01639 -4.000 |
Calibration file
calib-cspad2x2-03-2014-04-25/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data/reg/g/psdm/detector/alignment/cspad2x2/
2015-04-02-CSPAD2X2-3-MEC-Metrology.txt (1.0 SN07 D12A18)
Note from Gabriel and Philip
Note |
---|
Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5): - CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013. - CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further. - CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago). Thanks, Gabriel and Philip |
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-022015-04-02-CSPAD2X2-3-MEC-Metrology.txt
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.xlsx
Quality check
Code Block |
---|
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane:
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
Quad 0
segm: 0 20981 20978 -33 -36 -43703 -43708 -17 -22 0.04523 48482 48477 5 3 5
segm: 1 20978 20974 -152 -156 -43707 -43702 -73 -68 0.20189 48474 48480 -6 4 -5
|
Code Block |
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) Quad 0 segm: 0 20981 20978 -33 -36 -43703 -43708 -17 -22 0.04523 48482 48477 5 3 5 segm: 1 20978 20974 -152 -156 -43707 -43702 -73 -68 0.20189 48474 48480 -6 4 -5 2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) Quad 0 segm: 0 20979 -43705 43705 20979 -1 31 -37 -5 15 -21 -32 -32 -21 15 -0.02753 0.04097 32.009 segm: 1 20976 -43704 43704 20976 -28 -38 5 -5 -33 0 10 10 0 -33 0.00000 -0.09014 Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) Quad 0 segm: 0 20979 -43705 43705 20979 -1 31 -37 -5 15 -21 -32 -32 -21 15 -0.02753 0.04097 32.009 segm: 1 20976 -43704 43704 20976 -28 -38 5 -5 -33 0 10 10 0 -33 0.00000 -0.09014 -10.007 |
Calibration files
/alignment/cspad2x2//reg/g/psdm/detector
calib-cspad2x2-03-2015-04-02/
calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/
...
Code Block |
---|
0 : CxiDg2.0:Cspad2x2.0 1 : CxiDg2.0:Cspad2x2.1 2 : CxiSc1.0:Cspad2x2.0 3 : CxiSc2.0:Cspad2x2.0 4 : CxiSc2.0:Cspad2x2.1 5 : CxiSc2.0:Cspad2x2.2 6 : CxiSc2.0:Cspad2x2.3 7 : CxiSc2.0:Cspad2x2.4 8 : CxiSc2.0:Cspad2x2.5 9 : CxiSc2.0:Cspad2x2.6 10 : CxiSc2.0:Cspad2x2.7 11 : MecEndstation.0:Cspad2x2.6 12 : MecTargetChamber.0:Cspad2x2.0 13 : MecTargetChamber.0:Cspad2x2.1 14 : MecTargetChamber.0:Cspad2x2.2 15 : MecTargetChamber.0:Cspad2x2.3 16 : MecTargetChamber.0:Cspad2x2.4 17 : MecTargetChamber.0:Cspad2x2.5 18 : SxrBeamline.0:Cspad2x2.2 19 : SxrBeamline.0:Cspad2x2.3 20 : XcsEndstation.0:Cspad2x2.0 21 : XcsEndstation.0:Cspad2x2.1 22 : XppGon.0:Cspad2x2.0 23 : XppGon.0:Cspad2x2.1 24 : XppGon.0:Cspad2x2.2 25 : XppGon.0:Cspad2x2.3 |
Software
Access interface to any detector data and calibration parameters is implemented in Python Package Detector.
...