Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The DeviceType Field for network devices is 2-4 characters in length and can be found in the Table 1.0. The Area Field is 4-character field, with numbers and letters and can be found in Table 1.2. The Position Field contains a 2-character, a Subsystem Prefix, followed by a 2-digit Index from 01 to 99. The Prefix designates a subsystem of the control system as follows in Table 1.2. The Subnet Field is currently only used for a secondary NIC on the processors.  Currently this is only used for fast feedback subnet, in which "-fnet" is used. The example show below is the feedback node name for the magnet ioc in the linac-to-undualtor section of LCLS.

...

Examples of a device name would look as follows:

Advanced Tables - Table Plus
border0
columnTypesS,F,F,F
columnAttributesfont-size:12pt; text-align: center;"
aligncenter
title'Example Device Types'
highlightColorwhite
sortColumn1
bgcolorsilver
cellpadding10
cellspacing0
class''
sortIcontrue

Device Type

Nodename

 Comment

Access Switch

ACSW-IN20-NW01

 

Terminal Server

TS-IN20-NW01

 

Scope

SCOP-IN20-NW01

 LCLS Injector Scope

Scope

SCOP-SYS0-NW01

 LCLS Roaming Scope

Magnet IOC

IOC-IN20-MG01

 Magnet injector ioc

Magnet IOC 2nd NIC

IOC-IN20-MG01-FNET

  Magnet injector ioc feedback


To obtain an ip address for an LCLS device click here for SCCS IP/Node Name Request form. Fill out this form according the the naming conventions described herein and email this information to Charlie Granieri.

...