Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
...
All operations are from hpstracker in group C.
Connect !!! Remember to turn the fan on the FEB. !!!
and hybrid(s). Turn on the power to the FEB (see below for instructions). Remember to turn the fan on the FEB.
Instructions on how to power the FEB using MPOD with EPICS
FEB Power using Keithley: AVDDP: 5.5V, AVDDN: 5.5V, DVDD: 5.5V and flange power 5.5V (parallel to DVDD).
...
Check that the hybrid currents measured are ok. Sync status for each channel can be seen in register RceCore/DataPath[x]/Synced, 1xf for powered channels.
AVDDP: 5.5V, AVDDN: 5.5V, DVDD: 5.5V and flange power 5.5V (parallel to DVDD).
TBF
More detailed EPICS stuff here.
Setup the DAQ environment.
$ cd /u1/software/software_new
$ source setup_env.csh
$ cd /home/tracker/pelle/epics/medm_svt
$ ./runSVTGUIs.sh
Should pop up a few GUIs. (if you want to edit you can run command: $ medm GUINAME).
Setup the EPICS IOC.
$ cd /u1/software/software_new
$ source setup_env.csh
$ cd /home/tracker/pelle/epics/example/iocBoot/iocmyexampleApp
$ ./st.cmd
If things don't seem to work check if the control server port and IP are set correctly in the DAQ setup GUI.
Notes:
...
Instructions for powering hybrids with EPICS.
In the DAQ GUI: go to config and turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).
...