How to change the calibration constants used by recon?
(by Dave Smith, for the CAL case. ) There are 5 types of CAL calib.xml files, called
...
Okay, it won't actually crash the whole pipeline, just those jobs that look for non-existing calibration files. Coordinating with the pipeline caretakers before you make a change will help them be alert to why many jobs are suddenly failing...
How to find out which calibration constants were used ?
Example : CAL calib constants
...
You can do the same for the other 4 types of CAL calib.xml files that are used in recon, e.g. ci_intnonlin, peds, mpd, thold.
CAL calibrations
Trending CAL CPTs
Here is the trendiing of CU CAL module performances from CPTs runs taken at Pisa (2 suites) and at CERN (July, 7) : T01-FM109, T02-FM119and T03-FM101 : no evolution was found
...
August 7: Update of CU06 calibrations http://www.slac.stanford.edu/~reposeur/pdf resumé
- A new CAL pedestals (700000953) has been recorded
...
muonAsym.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN_correct_v2.xml
muonMPD.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN_correct_v2.xml
ACD calibrations
CU ACD have basically two calibration parameters for each channel (PMT), 6 in total - MIP peak position and pedestal (both - in ADC bins). Calibration parameters obtained in the 5 GeV pions runs on July 29, are given in the attachment