...
Here is the trendiing of CU CAL module performances from CPTs runs taken at Pisa (2 suites) and at CERN (July, 7) : T01-FM109, T02-FM119and T03-FM101 : no evolution was found
August 7: Intercalibartion of LEX1 and HEX8 has been performed.
A new CAL pedestals (700000953) has been recorded
Zach produced a set of xml files (see $LATCalibRoot/CAL/CU06)
cidac2adc.digitization-latte-v1r030603p2_700000446_digi_DIGI.xml
muonAsym.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN.xml
muonMPD.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN.xml
muonPeds.digitization-latte-v1r030603p4_700000953_digi_DIGI.FLIGHT_GAIN.xml
tholdci.CU06.FLIGHT_GAIN.08022006.xml
After intercalibration of LEX1 and HEX8 (from runs 700000700 to 700000750) the Asymmetry and MevPerDac files have been updated.
muonAsym.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN_correct_v2.xml
muonMPD.digitization-latte-v1r030603p2_700000276_digi_DIGI.FLIGHT_GAIN_correct_v2.xml
ACD calibrations
CU ACD have basically two calibration parameters for each channel (PMT), 6 in total - MIP peak position and pedestal (both - in ADC bins). Calibration parameters obtained in the 5 GeV pions runs on July 29, are given in the attachment