...
...
...
Se | Mode Description |
---|---|
0 | Soft Reset - interpreted at start-up to bypass hard reset initialization routine |
1 | One-Shot mode: one pulse on the input line results in a single sweep of the pulse picker. Does not automatically return to mode select. |
2 | Flip-Flop mode: will sweep the pulse picker each time a pulse is received on the input line. Does not automatically return to mode select. |
3 | Burst mode: will open the pulse picker on the first input pulse received, and close on the second. Does not automatically return to mode select. |
4 | Fast Open: moves the pulse picker to the full open position (P0). Automatically returns to mode select. |
5 | Fast Close: moves the pulse picker to the positive closed position (P1). Automatically returns to mode select. |
Sd | Status Description |
---|---|
0 | Waiting for Se mode selection |
10 | One-Shot Initialization |
11 | One-Shot Loop Waiting |
12 | One-Shot Complete |
20 | Flip-Flop Initialization |
21 | Flip-Flop Loop Waiting |
22 | Flip-Flop Loop Active |
30 | Burst Initialization |
31 | Burst Armed and Waiting |
32 | Burst Open Pulse Received |
33 | Burst Close Pulse Received |
39 | Burst Complete |
40 | Fast Open Initialization |
41 | Fast Open Complete |
50 | Fast Close Initialization |
51 | Fast Close Complete |
80 | Hard Reset/Power-Up Initialization |
81 | Soft Reset/Power-Up Initialization |
90 | Toggle Move Complete |
91 | Move to Positive Closed Position Complete |
92 | Move to Negative Closed Position Complete |
94 | Move to Open Position Complete |
95 | Close move did not execute because pulse picker is already closed |