Page History
Table of Contents |
---|
2x1 Sensor Geometry
The 2x1 sensor geometry was tested with microscope. Two slides from Chris Kenney's presentation shows the pixel sizes:Pixels size
The same presentation in PDF format: Pixels size
Optical measurement
Optical measurement is maintained by Chris Kenney. Detector or its quad is installed on microscope table and 3-d coordinates of all 2x1 sensor corners are measured with precision about 8um (RMS) in x-y plane. All corners in the measurement are numerated in arbitrary order. It is expected that numeration order should be the same for different measurements. This procedure depends on CSPAD construction;
...
Overview
Content Tools