Page History
...
The official place for CSPad alignment parameters is
/reg/d/psdm/<INSTRUMENT>/<experiment>/calib/CsPad::Calib<VERSION>/<CSPad-name>/<type>/<run-range>.data
The file name consists of the run range followed by the .data
, for example, 0-end.data
, 11-end.data
, 47-52.data
, etc.
List of types
All CSPAD geometry alignment parameters are split for 9 types:
...
All coordinates are defined in size of pixel, which is 109.92 x 109.92um (and 274.80 x 109.92um for two rows between two of 2x1 ASICs.) The quadrant size is pre-defined as 850x850. The margins, shifts and gaps are defined for these quads. The offset
and offset_corr
are defined for low-left angle of the rotated by n*90 degree quad. Size of entire CSPad image does not matter for this alignment.
offset_corr
Description of types
center
The tail of the path: center/<run-range>.data
Code Block |
---|
center_corr
The tail of the path: center
For individual quad position alignment use file: offset_corr/<run-range>.data
Code Block |
---|
dXq0 dXq1 dXq2 dXq3
dYq0 dYq1 dYq2 dYq3
dZq0 dZq1 dZq2 dZq3
|
marg_gap_shift
offset
The tail of the path: offset/<run-range>.data
Code Block |
---|
offset_corr
The tail of the path: offset_corr/<run-range>.data
Code Block |
---|
offset_corr
The tail of the path: offset_corr
For common gap and shift between quads correction use file marg_gap_shift/<run-range>.data
Code Block |
---|
dXq0 dXq1 dXq2 dXq3 dYq0 dYq1 dYq2 dYq3 dZq0 dZq1 dZq2 dZq3 |
marg_gap_shift
The tail of the path: marg_gap_shift/<run-range>.data
Code Block |
---|
offset of 2x1s in quad (for tilt)
/ offset of quads in image (for tilt)
/ / gaps
/ / / shifts
/ / / /
X: 15 40 0 32
Y: 15 40 0 32
Z: 0 0 0 0
|
quad_rotation
The tail of the path: quad_rotation/<run-range>.data
Code Block |
---|
quad_tilt
The tail of the path: quad_tilt/<run-range>.data
Code Block |
---|
rotation
The tail of the path: /<run-range>.data
Code Block |
---|
tilt
The tail of the path: /<run-range>.data
Code Block |
---|