...
Set Handle Switch
Code Block language none [B8 00 08 0A 40 00 00 XX] 00 = Open 01 = Closed 02 = Hardware Switch So: [B8 00 08 0A 40 00 00 00] [B8 00 08 0A 40 00 00 01] [B8 00 08 0A 40 00 00 02]
Reset the SDR repository
Code Block language none [B8 00 33 0A 40 00]
Synchronization Clock Interface
These commands can be used to enable/disable the Synchronization Clock Interface buffers on the COB. This can also (more correctly) be driven via the ATCA e-Keying mechanism. These commands will override whatever e-keying has taken place.
Code Block | ||
---|---|---|
| ||
GET:
ipmitool -I lan -H <shelf_ip> -t <slot_ipmb_address> -b 0 -A NONE raw 0x2e 0x38 0x0a 0x40 0x00 0x00 0x00 <pin>
SET:
ipmitool -I lan -H <shelf_ip> -t <slot_ipmb_address> -b 0 -A NONE raw 0x2e 0x39 0x0a 0x40 0x00 0x00 0x00 <pin> <state>
Where:
<shelf_ip> is either the IP address or hostname of the shelf manager
<slot_ipmb_address> is (0x80 + slot*2) for the ASIS 2, 5, and 6 slot shelves. (Not for the 14 slot.)
<pin> is
BP_CLK0_OE = 0x30
BP_CLK1_OE = 0x31
BP_CLK2_OE = 0x32
BP_CLK3_OE = 0x33
BP_CLK4_OE = 0x34
BP_CLK5_OE = 0x35
<state> 1 for enabled, 0 for disabled.
|
Custom COB IPMI commands
...