Versions Compared

Old Version 25

changes.mady.by.user Kelly (Arrighi), Heather

Saved on

compared with

New Version 26

changes.mady.by.user Kelly (Arrighi), Heather

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

These instructions should be performed as the glastrm user user or with appropriate priviledges to write in the GLAST_EXT area.

  1. Download Python 2.7.1 from http://www.python.org/ftp/python/2.7.1/Python-2.7.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Ungzip and Untar the file Python-2.7.1.tgz
  4. Change directory to Python-2.7.1
  5. edit setup.py, in detect_modules() change the lines from:

...

  1. Execute ./configure --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.7.1/gcc34
  2. Execute make
  3. Execute make install
  4. Leave and erase the current directory (Python-2.7.1)

Additional Python Modules

These modules should additionally be installed into python after updating PATH to point to the new python binary.

distribute 0.6.16 for use with pip

  1. curl -O http://python-distribute.org/distribute_setup.pyImage Added
  2. python distribute_setup.py

pip 1.0.1

easy_install replacement that should also work with python 3.0

  1. curl -O https://github.com/pypa/pip/raw/master/contrib/get-pip.pyImage Added
  2. python get-pip.py

nose 1.0.0

unit test framework necessary for running numpy and scipy unit tests

  1. pip install nose

NumPy - 1.5.1

Still installing by hand to include --fcompiler flag to force correct fortran compiler to be used.  This is dictated by whatever blas and lapack are linked against.  For more information, see the numpy INSTALL.txt file.

  1. Download numpy-1.5.1.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract numpy-1.5.1.tar.gz
  4. Change directory to numpy-1.5.1
  5. python setup.py build --fcompiler=gnu (for g77) or gnu95 for gfortran.
    It seems the rhel4s have blas and lapack linked against g77, while rhel5 uses gfortran
  6. python setup.py install
  7. Run the test routine by starting up python and doing:
    import numpy
    numpy.test()
  8. Leave and erase the current directory (numpy-1.5.1)

PyFITS - 2.1.1

  1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract pyfits-2.1.1.tar.gz
  4. Change directory to pyfits-2.1.1
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase pyfits-2.1.1

matplotlib 0.99

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract matplotlib-0.99.1.tar.gz
  3. Change directory to matplotlib-0.99.1/ 
  4. setenv DISPLAY localhost:0.0
  5. xhost +
  6. Edit setup.cfg set wxagg = False, macosx = False
  7. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py build
  8. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  9. Leave and erase matplotlib-0.99.1/

pywcs-1.7-4.4.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract pywcs-1.7-4.4.4.tar.gz
  3. Change directory to pywcs-1.7-4.4.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  5. Leave and erase pywcs-1.7-4.4.4

APLpy-0.9.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract APLpy-0.9.4.tar.gz
  3. Change directory to APLpy-0.9.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  5. Leave and erase APLpy-0.9.4

4Suite XML - 1.0.2

  1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/pythonExtract 4Suite-XML-1.0.2.tar.gz
  3. Change directory to 4Suite-XML-1.0.2
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34
  5. Leave and erase 4Suite-XML-1.0.2

iPython - 0.10

  1. Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract ipython-0.10.tar.gz
  4. Change directory to ipython-0.10
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase ipython-0.10

Scipy - 0.7.2

  1. Download ipython-0.10.tar.gz from http://www.scipy.org/ and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract scipy-0.7.2.tar.gz
  4. Change directory to scipy-0.7.2
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase scipy-0.7.2

2.5.1

These are instructions for building Python 2.5.1 for the various OSes supported.

...

  1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
  3. Ungzip and Untar the file Python-2.5.1.tgz
  4. Change directory to Python-2.5.1
  5. Set the environment variable EXTRA_CFLAGS to "-fno-common"
  6. Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40 --enable-unicode=ucs2
  7. Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
  8. Execute make
  9. Execute make install
  10. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

...

  1. Download pyfits-1.3.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-1.3.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
  3. Extract pyfits-1.3.tar.gz
  4. Change directory to pyfits-1.3
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install
  6. Leave and erase pyfits-1.3

4Suite XML - 1.0.2

  1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
  3. Extract 4Suite-XML-1.0.2.tar.gz
  4. Change directory to 4Suite-XML-1.0.2
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python/2.5.1-gl3/gcc40
  6. Leave and erase 4Suite-XML-1.0.2

...

  1. Download Python 2.5.1 from http://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/python
  3. Ungzip and Untar the file Python-2.5.1.tgz
  4. Change directory to Python-2.5.1
  5. Set the environment variable EXTRA_CFLAGS to "-fno-common"
  6. Execute ./configure --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40 --enable-unicode=ucs2
  7. Edit the file Modules/posixmodule.c and change lines 342 and 360 to "#ifdef _APPLE_" (without quotes) and save/exit.
  8. Execute make
  9. Execute make install
  10. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

...

  1. Download numpy-1.2.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
  3. Extract numpy-1.2.0.tar.gz
  4. Change directory to numpy-1.2.0
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
  6. Leave and erase the current directory (numpy-1.2.0)

PyFITS - 2.1.1

  1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
  3. Extract pyfits-2.1.1.tar.gz
  4. Change directory to pyfits-2.1.1
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
  6. Leave and erase pyfits-2.1.1

4Suite XML - 1.0.2

  1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
  3. Extract 4Suite-XML-1.0.2.tar.gz
  4. Change directory to 4Suite-XML-1.0.2
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install --prefix /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40
  6. Leave and erase 4Suite-XML-1.0.2

iPython - 0.10

  1. Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/ if it doesn't already exist.
  2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python
  3. Extract ipython-0.10.tar.gz
  4. Change directory to ipython-0.10
  5. Execute /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/bin/python setup.py install
  6. Leave and erase ipython-0.10

...

  1. Execute ./configure --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34
  2. Execute make
  3. Execute make install
  4. Leave and erase the current directory (Python-2.5.1)

Additional Python Modules

These modules should additionally be installed into python.

...

  1. Download numpy-1.4.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract numpy-1.4.0.tar.gz
  4. Change directory to numpy-1.4.0
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  6. Leave and erase the current directory (numpy-1.4.0)

PyFITS - 2.1.1

  1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract pyfits-2.1.1.tar.gz
  4. Change directory to pyfits-2.1.1
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  6. Leave and erase pyfits-2.1.1

matplotlib 0.99

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract matplotlib-0.99.1.tar.gz
  3. Change directory to matplotlib-0.99.1/ 
  4. setenv DISPLAY localhost:0.0
  5. xhost +
  6. Edit setup.cfg set wxagg = False, macosx = False
  7. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py build
  8. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  9. Leave and erase matplotlib-0.99.1/

pywcs-1.7-4.4.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract pywcs-1.7-4.4.4.tar.gz
  3. Change directory to pywcs-1.7-4.4.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  5. Leave and erase pywcs-1.7-4.4.4

APLpy-0.9.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract APLpy-0.9.4.tar.gz
  3. Change directory to APLpy-0.9.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  5. Leave and erase APLpy-0.9.4

4Suite XML - 1.0.2

  1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/pythonExtract 4Suite-XML-1.0.2.tar.gz
  3. Change directory to 4Suite-XML-1.0.2
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34
  5. Leave and erase 4Suite-XML-1.0.2

iPython - 0.10

  1. Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract ipython-0.10.tar.gz
  4. Change directory to ipython-0.10
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl5/gcc34/bin/python setup.py install
  6. Leave and erase ipython-0.10

...

  1. Download Python 2.6.5 installer from http://www.python.org
  2. Add
    1. numpy 1.4.1
    2. pyfits 2.3.1
    3. matplotlib 0.99.3
    4. pywcs 1.81-4.4.4 using tar.gz  using python setup.py install
    5. aplpy 0.9.4 tar.gz using python setup.py install
    6. 4SuiteXML 1.0.2 using zip file
    7. scipy 0.8.0b1
    8. ipython 0.10, install using tar.gz using python setup.py install
    9. setuptools 0.6c11
    10. nose 0.11.3 install from tar.gz using python setup.py install

Additional Python Modules

These modules should additionally be installed into python.

...

  1. Download numpy-1.4.0.tar.gz from http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103&release_id=628858 and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract numpy-1.4.0.tar.gz
  4. Change directory to numpy-1.4.0
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase the current directory (numpy-1.4.0)

PyFITS - 2.1.1

  1. Download pyfits-2.1.1.tar.gz from http://www.stsci.edu/resources/software_hardware/pyfits/pyfits-2.1.1.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract pyfits-2.1.1.tar.gz
  4. Change directory to pyfits-2.1.1
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase pyfits-2.1.1

matplotlib 0.99

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract matplotlib-0.99.1.tar.gz
  3. Change directory to matplotlib-0.99.1/ 
  4. setenv DISPLAY localhost:0.0
  5. xhost +
  6. Edit setup.cfg set wxagg = False, macosx = False
  7. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py build
  8. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  9. Leave and erase matplotlib-0.99.1/

pywcs-1.7-4.4.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract pywcs-1.7-4.4.4.tar.gz
  3. Change directory to pywcs-1.7-4.4.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  5. Leave and erase pywcs-1.7-4.4.4

APLpy-0.9.4

  1. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  2. Extract APLpy-0.9.4.tar.gz
  3. Change directory to APLpy-0.9.4
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  5. Leave and erase APLpy-0.9.4

4Suite XML - 1.0.2

  1. Download 4Suite-XML-1.0.2.tar.gz from http://downloads.sourceforge.net/sourceforge/foursuite/4Suite-XML-1.0.2.tar.gz?use_mirror=voxel and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/pythonExtract 4Suite-XML-1.0.2.tar.gz
  3. Change directory to 4Suite-XML-1.0.2
  4. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install --prefix /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34
  5. Leave and erase 4Suite-XML-1.0.2

iPython - 0.10

  1. Download ipython-0.10.tar.gz from http://ipython.scipy.org/dist/ipython-0.10.tar.gz and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract ipython-0.10.tar.gz
  4. Change directory to ipython-0.10
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase ipython-0.10

Scipy - 0.7.2

  1. Download ipython-0.10.tar.gz from http://www.scipy.org/ and save to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python if it doesn't already exist.
  2. Change directory to /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python
  3. Extract scipy-0.7.2.tar.gz
  4. Change directory to scipy-0.7.2
  5. Execute /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.6.5/gcc34/bin/python setup.py install
  6. Leave and erase scipy-0.7.2