...
All agreed rotating the display was fast. What seemed slower was going to the next event. Possibly due to Corba client? Also note that ROOT files are opened/loaded for every event, Tom wonders if that's slow. Tony points out that all the steps are possibly slow. (Tony* Note there are separate issues depending if one is working with a local gleam server or a remote gleam server (the default way of running WIRED right now). In the latter case the opening root files, processing events with gleam and fetching events is all slow – way slower than the 2 seconds that Tracy is complaining about. When running with a local gleam server it is not clear that these issues are relevant).
There are two upcoming new hires - but it will take at least a month for one to come up to speed.
...
- Look into next event speed issues LWRD-10@JIRA
- Provide text box to input run id / event id to load random events LWRD-11@JIRA
- Provide text box and interface to FluxSvc as Fred does to modify source used for simulation LWRD-12@JIRA
- Provide point coordinates as the old old GUI does LWRD-13@JIRA
- Should be possible at least for standard views
- Provide link to updated Wired that Tracy is now using and info concerning missing plug-in that had to be installed, or improve JAVAWS to fix issues LWRD-14@JIRA
- Includes instance tree - but that still needs to be populated for Gleam?
- Provide reasonable way to fire up Wired from Gleam using appropriate JO settings LWRD-15@JIRA
- Allow replay of events LWRD-16@JIRA
- Turn off assumption that network is required to read in events
- Update wired to allow input ior file
- Make sure last path used for ior is remembered by Wired LWRD-17@JIRA
- Update workbook to explain Wired usage
- From Elliott:
run through an Run# Event# file and produce a jeg for each event with the views selected (e.g., one jpeg with x-y, x-z, y-z views). One should also be able to setup the detail of what detector elements would appear. LWRD-18@JIRA
List of things we were working on with Heather:
- Provide support for input ROOT relation files
- This should already be done as of GR v17r16
The openFile method is expecting files in the order: mc, digi, rec, relation, gcr -- where you can insert "" for a file to skip. For the relations to fully work - you would need to read in mc, digi, and recon - otherwise, some of the relations may be unable to be populated on the TDS.
- This should already be done as of GR v17r16
- Handle switching from MC to real Data within the same Gleam session, where the types of input ROOT files will change
- Also should be complete as of GR v18r4p2 - could add this into Pass7 branch
- Interface for input merit file
- This is the one that still needs to be done!!
Jira Issues | ||||
---|---|---|---|---|
|
...
List of Wired Concerns from Tracy July 13, 2010 - here for reference
...