Page History
| Include Page | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
| Include Page | ||||
|---|---|---|---|---|
|
Alignment procedure
...
Metrolody files from different optical measurements are collected in directories with specific dates under
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/
...
- CSPad2x2-1.txt Q133 D7A16
- CSPad2x2-2.txt Q110 D3A14
- CSPad2x2-3.txt Q111 D12A18
- CSPad2x2-4.txt Q135 D19A19
- CSPad2x2-5.txt Q022 D15A15
- CSPad2x2-6.txt Q157 Used in Run 6
...
Calibration types
In 2014 new universal detector geometry software is implemented and documented in the Detector Geometry page. In this approach detector geometry calibration information is located in a single file of type
...
center- x, y, z center position for each two 2x1 in the detector. Obtained from optical measurement.tilt- two 2x1-tilt angle for the detector in fractional degree. Obtained from optical measurement.
| Note |
|---|
Calibration types Type |
...
2013-02-13 CSPAD2x2-1 Q133 D7A16
Metrology file
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-01-2013-02-13/2013-02-13-CSPAD2X2-1-MEC-Metrology.txt
Quality check
| Code Block |
|---|
pairsegm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pairsegm: 0 2090920902 2090220909 -2 2 -5 -43538 -43539 01 1 -0.00006 -0.0032900197 48297 48297 0 -7 7 -1 pairsegm: 1 2090620902 2090220906 -2 2 -2 -43538 -43538 0 0 -0.00000 48296 0.00000 48296 0 48296 48296-4 0 Old version of quality check: pair: S1 S2 4dS1 0 |
Calibration files
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-01-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.1/
geometry/1-end.datacenter/1-end.datatilt/1-end.data
2013-02-13 CSPAD2x2-2 Q110 D3A14
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-02-2013-02-13/2013-02-13-CSPAD2X2-2-MEC-Metrology.txt
Quality check
dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20909 20902 2 -5 43538 43539 0 1 -0.00006 -0.00329 48297 48297 0 7 -1
pair: 1 20906 20902 2 -2 43538 43538 0 0 0.00000 0.00000 48296 48296 0 4 0 |
Calibration files
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-01-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.1/
geometry/1-end.datacenter/1-end.datatilt/1-end.data
2013-02-13 CSPAD2x2-2 Q110 D3A14
Metrology file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-02-2013-02-13/2013-02-13-CSPAD2X2-2-MEC-Metrology.txt
Quality check
| Code Block |
|---|
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
segm: 0 20896 20905 |
| Code Block |
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20905 20896 5 -4 43536 43536 -2 -2 0.00001 0.00066 48291 48294 -3 9 0 pair: 1 20905 20905 -22 -22 43540 43536 10 6 -0.00051 -0.02895 48294 48299 -5 4 0 -43536 -43536 4 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-02-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.2/geometry/0-end.data
2013-02-13 CSPAD2x2-3 Q111 D12A18
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2013-02-13/2013-02-13-CSPAD2X2-3-MEC-Metrology.txt
Quality check
| Code Block |
|---|
pair: -2 -2 0.00066 48294 48291 3 -9 S1 0 segm: 1 S220905 20905 dS1 22 dS2 22 L1 -43540 -43536 L2 dL16 dL2 10 <dS/L>-0.02895 48299 angle(deg) 48294 D1 5 D2 0 dD d(dS) d(dL)-4 Old version of quality check: pair: 0 20907 20908S1 -5S2 dS1 -4 dS2 43540 43545 L1 0 L2 5 dL1 -0.00005 -0.00263dL2 48302 <dS/L> 48301angle(deg) D1 1 D2 -1 -5dD d(dS) d(dL) pair: 1 0 20905 20896 20904 20907 5 421 -4 424 43536 43538 43536 43538 -2032 -2032 0.0097000001 0.5560100066 48291 48294 -3 48299 482999 0 pair: 1 20905 20905 -322 0-22 43540 43536 10 6 -0.00051 -0.02895 48294 48299 -5 0 4 |
Calibration file
/reg/g/psdm/<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-0302-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.32/geometry/0-end.data
2013-02-13 CSPAD2x2-
...
3 Q111 D12A18
Metrology file
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-0403-2013-02-13/2013-02-13-CSPAD2X2-43-MEC-Metrology.txt
Quality check
| Code Block |
|---|
pairsegm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pairsegm: 0 2090620908 2090520907 -8 5 -9 4 43540 -43540 -43545 3 5 3 -0.00020 -0.0111900592 4829748301 4829948302 -21 1 05 pairsegm: 1 2090820907 2089820904 -12 421 -22424 -43538 43541 -43538 43538 -203 12 -203 0.55599 48299 48299 9 -0.000390 3 -0.022370 Old version of quality check: pair: S1 48299 48295S2 dS1 4 dS2 10 L1 3 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.4/geometry/0-end.data
2013-02-13 CSPAD2x2-5 Q022 D15A15
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/2013-02-13-CSPAD2X2-5-MEC-Metrology.txt
Quality check
| Code Block |
|---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20904 20904 2 2 43536 43536 -1 -1 0.00005 0.00263 48294 48294 0 0 0
pair: 1 20908 20909 122 123 43540 43545 -61 -56 0.00281 0.16119 48302 48302 0 -1 -5 |
Calibration file
/reg/g/psdm/detector/alignment/cspad2x2/
2013-02-13 CSPAD2x2-6 Q157
Metrology file
/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/2013-02-13-CSPAD2X2-6-MEC-Metrology.txt
Quality check
L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20907 20908 -5 -4 43540 43545 0 5 -0.00005 -0.00263 48302 48301 1 -1 -5
pair: 1 20904 20907 421 424 43538 43538 -203 -203 0.00970 0.55601 48299 48299 0 -3 0 |
Calibration file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-03-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data
2013-02-13 CSPAD2x2-4 Q135 D19A19
Metrology file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/2013-02-13-CSPAD2X2-4-MEC-Metrology.txt
Quality check
| Code Block |
|---|
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
segm: 0 20905 20906 8 9 -43540 -43540 3 3 -0.01119 48299 48297 2 -1 0
segm: 1 20898 20908 12 22 -43541 -43538 9 12 -0.02237 48295 48299 -4 -10 -3
Old version of quality check:
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20906 20905 -8 -9 43540 43540 3 3 -0.00020 -0.01119 48297 48299 -2 1 0
pair: 1 20908 20898 -12 -22 43541 43538 12 9 -0.00039 -0.02237 48299 48295 4 10 3 |
Calibration file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.4/geometry/0-end.data
2013-02-13 CSPAD2x2-5 Q022 D15A15
Metrology file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/2013-02-13-CSPAD2X2-5-MEC-Metrology.txt
Quality check
| Code Block |
|---|
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
segm: 0 20904 20904 -2 -2 -43536 -43536 -1 -1 0.00263 48294 48294 0 0 0
segm: 1 20909 20908 -122 -123 -43540 -43545 -56 -61 0.16119 48302 48302 0 1 5
Old version of quality check:
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL)
pair: 0 20904 20904 2 2 43536 43536 -1 -1 0.00005 0.00263 48294 48294 0 0 0
pair: 1 20908 20909 122 123 43540 43545 -61 -56 0.00281 0.16119 48302 48302 0 -1 -5 |
Calibration file
<PATHREPO>/detector/alignment/cspad2x2/
2013-02-13 CSPAD2x2-6 Q157
Metrology file
<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/2013-02-13-CSPAD2X2-6-MEC-Metrology.txt
Quality check
| Code Block |
|---|
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
segm: 0 20900 20903 -59 -56 -43541 -43539 -29 -27 0.07567 48298 48297 1 -3 -2
segm: 1 20977 20979 -49 -47 -43707 -43705 -22 -20 0.06292 48478 48482 -4 -2 -2
Old version of quality check:
|
| Code Block |
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20903 20900 59 56 43541 43539 -27 -29 0.00132 0.07567 48296 48297 -1 3 2 pair: 1 20979 20977 49 47 43707 43705 -20 -22 0.00110 0.06292 48481 48477 4 2 2 |
Calibration file
/reg/g/psdm<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.0/geometry/0-end.data
2014-04-25 CSPAD2X2-3 (1.0 SN07 D12A18)
Metrology file
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2014-04-25/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt
...
| Code Block |
|---|
Quality check in XY plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) segm: 0 20979 20982 0 3 -43695 -43689 -2 4 -0.00197 48468 48468 0 -3 -6 segm: 1 20981 20981 123 123 -43701 -43695 51 57 -0.16127 48478 48469 9 0 -6 Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) segm: 0 20980 -43692 43692 20980 18 5 -2 -15 11 -8 13 13 -8 11 -0.01049 0.03004 -13.001 segm: 1 20981 -43698 43698 20981 -4 -8 0 -4 -6 -2 4 4 -2 -6 -0.00262 -0.01639 -4.000 |
Calibration file
/reg/g/psdm<PATHREPO>/detector/alignment/cspad2x2/
2015-04-02 CSPAD2X2-3 (1.0 SN07 D12A18)
...
| Note |
|---|
Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5): - CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013. - CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further. - CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago). Thanks, Gabriel and Philip |
Metrology file
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.txt
/reg/g/psdm/<PATHREPO>/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.xlsx
...
| Code Block |
|---|
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) Quad 0 segm: 0 20981 20978 -33 -36 -43703 -43708 -17 -22 0.04523 48482 48477 5 3 5 segm: 1 20978 20974 -152 -156 -43707 -43702 -73 -68 0.20189 48474 48480 -6 4 -5 2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) Quad 0 segm: 0 20979 -43705 43705 20979 -1 31 -37 -5 15 -21 -32 -32 -21 15 -0.02753 0.04097 32.009 segm: 1 20976 -43704 43704 20976 -28 -38 5 -5 -33 0 10 10 0 -33 0.00000 -0.09014 -10.007 |
Calibration
...
file
<PATHREPO>/reg/g/psdm/detectorcalib-cspad2x2-03-2015-04-02/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/
geometry/0-end.datacenter/0-end.datatilt/0-end.data
Calibration files
In archive
- All files for CSPAD2x2 alignment are stored under directory
/reg/g/psdm/detector - Files named as
*-Metrology.xlsxand*-Metrology.txtare original metrology and its text version. - Calibration files are located under
<PATHREPO>/reg/g/psdm/detector/alignment/cspad2x2/calib/directory. - Calibration files can be deployed in the experimental calib store using file manager in
Calibration Management Tool
...
| Code Block |
|---|
/reg/d/psdm/<PATH>/mec/mec73313/calib/CsPad2x2::CalibV1/ MecTargetChamber.0:Cspad2x2.1/<calib-type>/0-end.data MecTargetChamber.0:Cspad2x2.1/<type>/0-end.data ... ... MecTargetChamber.0:Cspad2x2.1/<calib-type>/0-end.data |
where <type> stands for geometry, tilt, and center.
Known detectors
on 2016-06-15:
| Code Block |
|---|
0 : CxiDg2.0:Cspad2x2.0 1 : CxiDg2.0:Cspad2x2.1 2 : CxiDg3.0:Cspad2x2.0 3 : CxiSc1.0:Cspad2x2.0 4 : CxiSc2.0:Cspad2x2.0 5 : MecTargetChamberCxiSc2.0:Cspad2x2.1/<type>/0-end.data |
where <type> stands for geometry, tilt, and center.
Known detectors
on 2014-07-04:
| Code Block |
|---|
0 : CxiDg2 6 : CxiSc2.0:Cspad2x2.2 7 : CxiSc2.0:Cspad2x2.03 18 : CxiDg2CxiSc2.0:Cspad2x2.14 2 9 : CxiSc1CxiSc2.0:Cspad2x2.05 310 : CxiSc2.0:Cspad2x2.06 411 : CxiSc2.0:Cspad2x2.17 512 : CxiSc2.0:Cspad2x2.28 6 13 : CxiSc2.0:Cspad2x2.39 7 14 : CxiSc2MecEndstation.0:Cspad2x2.46 8 15 : CxiSc2MecTargetChamber.0:Cspad2x2.50 9 16 : CxiSc2MecTargetChamber.0:Cspad2x2.61 10 17 : CxiSc2MecTargetChamber.0:Cspad2x2.72 11 18 : MecEndstationMecTargetChamber.0:Cspad2x2.63 12 19 : MecTargetChamber.0:Cspad2x2.04 13 20 : MecTargetChamber.0:Cspad2x2.15 14 21 : MecTargetChamberSxrBeamline.0:Cspad2x2.2 15 22 : MecTargetChamberSxrBeamline.0:Cspad2x2.3 16 23 : MecTargetChamberXcsEndstation.0:Cspad2x2.40 17 24 : MecTargetChamberXcsEndstation.0:Cspad2x2.51 18 25 : SxrBeamlineXcsEndstation.0:Cspad2x2.2 19 26 : SxrBeamlineXcsEndstation.0:Cspad2x2.3 20 27 : XcsEndstation.0:Cspad2x2.04 21 28 : XcsEndstationXppGon.0:Cspad2x2.10 22 29 : XppGon.0:Cspad2x2.01 23 30 : XppGon.0:Cspad2x2.12 24 31 : XppGon.0:Cspad2x2.23 25 32 : XppGon.0:Cspad2x2.3 |
...
4 |
Software
Access interface to any detector data and calibration parameters is implemented in Python Package Detector.
...
Whenever necessary image can be generated by the psana Module CSPadPixCoords::CSPad2x2ImageProducer, which access geometry calibration data automatically, generates 2-d image and saves it in the event store for further processing.
...
Alternatively, Python modules for CSPAD2x2 geometry are available in the package PyCSPadImage documented in CSPAD pixel coordinates and image producer in Python. They provides an interface for getting Calibration parameters from DB and local directory, Pixel coordinates, Image producer
...
- Calibration Management Tool
- Package Detector
- Detector Geometry
- CSPAD Alignment
- CSPAD Geometry and Alignment
- CSPAD pixel coordinates and image producer in Python (older version CSPAD image producer in Python )
Deprecated
C++ classes and modules for psana
...
- Package CSPadPixCoords generates and returns the CSPad2x2 pixel coordinates, taking into account geometry alignment parameters, if available in the expected place under /reg/d/psdm/<instrument>/<experiment>/calib directory.
- Module CSPadPixCoords::CSPad2x2ImageProducer produces CSPad2x2 image, accounting for correct geometry, if available.
Calibration files
<PATHREPO>/detectorcalib-cspad2x2-03-2015-04-02/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/
center/0-end.datatilt/0-end.data
References
<PATHREPO>- explanation of this path and <PATH>
Overview
Content Tools