Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Add 4th field $(INST)

...

BSA PV Descriptions

PV NamePV Description

BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):SUMHST0 ... SUMHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):SUMCNTHST0 ... SUMCNTHST6SUMCNTHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):SUMRMSHST0 ... SUMRMSHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):SUMPIDUHST0 ... SUMPIDUHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):SUMPIDLHST0 ... SUMPIDLHST63

Raw power
  Count
  RMS devationdeviation
  Pulse ID (upper 32 bits)
  Pulse ID (lower 32 bits)

BLEN:$(AREA):$(POS):$(INST):SUM_SLOPE

Raw power slope

BLEN:$(AREA):$(POS):$(INST):SUM_OFFSET

Raw power offset

BLENDEV):$(AREA):$(POS):$(INST):IMAXHST0 ... IMAXHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):IMAXCNTHST0 ... IMAXCNTHST6IMAXCNTHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):IMAXRMSHST0 ... IMAXRMSHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):IMAXPIDUHST0 ... IMAXPIDUHST63
BLEN:$(DEVAREA):$(AREAPOS):$(POSINST):IMAXPIDLHST0 ... IMAXPIDLHST63

Bunch length
  Count
  RMS devationdeviation
  Pulse ID (upper 32 bits)
  Pulse ID (lower 32 bits)

BLEN:$(AREA):$(POS):$(INST):IMAX_SLOPE

Bunch length slope

BLEN:$(AREA):$(

DEV

POS):$(INST):IMAX_OFFSET

Bunch length offset

BLEN:$(AREA):$(POS):$(INST):TMITHST0 ... TMITHST63Transmitted intensity (scaled)
BLEN:$(AREA):$(POS):$(INST):TMIT_SLOPETransmitted intensity (scaled) slope
BLEN:$(AREA):$(POS):$(INST):TMIT_OFFSETTransmitted intensity (scaled) offset
BLEN$(DEV):$(AREA):$(POS):$(INST):IMAXFLOATHST0 ... IMAXFLOATHST63Bunch length (floating point)
BLEN:$(AREA):$(POS):$(INST):IMAXFLOAT_SLOPEBunch length (floating point) slope
BLEN:$(AREA):$(POS):$(INST):IMAXFLOAT_OFFSETBunch length (floating point) offset
BLEN$(DEV):$(AREA):$(POS):$(INST):SUMFLOATHST0 ... SUMFLOATHST63Raw power (floating point)
BLEN:$(AREA):$(POS):$(INST):SUMFLOAT_SLOPERaw power (floating point) slope
BLEN:$(AREA):$(POS):$(INST):SUMFLOAT_OFFSETRaw power (floating point) offset
BLEN$(DEV):$(AREA):$(POS):$(INST):BLSTATUSHST0 ... BLSTATUSHST63BLEN Status:
  b31: 1 if error happened
  b30: 1 if in calibration mode
  b29: 0 if ADC disabled
  If b31=1, b30=1, or b29=0, all other BSA PVs for the device will be marked "Invalid"
BLEN:$(AREA):$(POS):$(INST):BLSTATUS_SLOPEBLEN Status slope 
BLEN:$(AREA):$(POS):$(INST):BLSTATUS_OFFSETBLEN Status offset

IMAX Scaling Factor

AppTypeLocation

IMAX Scaling Factor

0 = Pyro0 = BC164
0 = Pyro1 = BC28
1 = Gap diode0 = Injector1024
1 = Gap diode1 = BC164