Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
...
Code Block |
---|
------- HPS SVT Start of Shift Checklist -------- Shifter name: Time and date: Previous Shifter: Hall B beamline shifter: Current run: SVT module power status (ON/OFF): Write down lowest and highest values of AVDD, DVDD and V125 currents e.g. Lowest: AVDD - 100 mA, Top, Hybrid 3, V125 incl. module nr: What is the high voltage value for each module- ... Highest: AVDD - 400 mA, Bottom, Hybrid 5, V125 - ... Lowest: Highest: Check high voltage currentssetting for each module (should be 0180 in GUIV) (OK?): Check SVT module temperature, write down highest and lowest temperature e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, Hybrid 1, 24.3 C Note: FPGA 5, Hybrid 1 is not in use and should be 0. Check temperature at the vacuum chamber input and output: [Temperature (C)] Input: Output: ECal status (e.g. Do all HV look ok? etc.): Trigger statusTrigger Type (e.g. Single Cluster Trigger Top): Trigger Rate: Pair spectrometer magnet: [Current] [B-field] Value: Accelerator status: Beam current (nA): Beam widthposition X,Y (um): Beam plans for the shift (Closest measurement to Pair spectrometer): SVT plans for the shift (Closest measurement to Pair spectrometer): Notes from previous shifter: |
...
...
Code Block |
---|
------- HPS SVT End ofHourly Shift Checklist -------- Shifter name: Current run/status: Shifter name: Time and date: Next Shifter: SVT module power status (ON/OFF): Write down lowest and highest values of AVDD, DVDD and V125 currents e.g. Lowest: AVDD - 100 mA, Top, Hybrid 3, V125 - ... Highest: AVDD - 400 mA, Bottom, Hybrid 5, V125 - incl. module nr: What is the... Lowest: Highest: Check SVT module temperature, write down highest and lowest temperature e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, Hybrid 1, 24.3 C Note: FPGA 5, Hybrid 1 is not in use and should be 0. Check high voltage valuesetting for each module: Check hightemperature voltageat currentsthe (shouldvacuum bechamber 0input inand GUI)output: Check SVT module temperature, write down highest and lowest temperature[Temperature (C)] Input: Output: ECal status (e.g. Do all HV look ok? etc.): Trigger Type (e.g. Single Cluster Trigger Top): Trigger status Rate: Pair spectrometer magnet: [Current] [B-field] Value: Accelerator status: Beam current (nA) (Closest measurement to Pair spectrometer): Beam widthposition X,Y (um) (Closest measurement to Pair spectrometer): Beam plans for the shift: Notes/comments: |
...
Code Block |
---|
------ HPS SVT |
...
Shift Summary Checklist ------- |
...
Shifter name: |
...
Time and date: |
...
Next Shifter: |
...
Runs taken:
?Run nr Start Stop Events Beam current Beam width Comments
...
Notes/comments:
|