...
Firstly, you need to obtain a membership in the ilc Virtual Organization (VO), which is sponsored by DESY. This is a VO on the LCG grid. Alternately, you can become a member of the calice VO, but this will only work if your institution is actually a member of this collaboration.
Follow the workflow at https://grid-voms.desy.de:8443/vovoms/ilc/register/vomrsstart.action which will require several rounds of confirmations and emails.
...
...
Somewhat confusingly, there is another ILC VO run by Fermilab located at https://voms.fnal.gov:8443/vomrs/ilc/vomrs which is on the OSG grid. The two Virtual Organizations are not interchangeable so make sure you get a membership in the DESY one to follow the instructions in this tutorial!
Setup
| Info |
|---|
The rest of the tutorial assumes that you are running from an lxplus node at CERN and using the bash shell. |
...
| No Format |
|---|
mkdir -p ~/.glite/vomses
cd ~/.glite/vomses
wget http://grid.desy.de/etc/vomses/ilc-grid-voms.desy.de
|
Now, the voms-proxy-init command should work correctly.
...
| No Format |
|---|
lfc-ls -l /grid/ilc/mc/ILC500/SM250fb-1/generated/ |
Fetching a Grid LCIO File to SLAC from DESY mass storage
Here is a more advanced script showing how to fetch a file to SLAC, assuming that you have an lxplus account at CERN.
| No Format |
|---|
# ssh to cern ssh lxplus # setup grid tools source /afs/cern.ch/project/gd/LCG-share/current/etc/profile.d/grid_env.sh # start a grid session voms-proxy-init -verify -debug -voms ilc # copy the file to temp location on lxplus (it's fast) lcg-cp -v --vo ilc lfn:/grid/ilc/mc-2008/simulated/LDC01_05Sc/ZPole/M-6-5p2_ZPoleuds_LDC01_05Sc_LCP_Test_ZPole_0001.slcio file:/tmp//M-6-5p2_ZPoleuds_LDC01_05Sc_LCP_Test_ZPole_0001.slcio # copy file to slac (slow...go get some coffee) scp M-6-5p2_ZPoleuds_LDC01_05Sc_LCP_Test_ZPole_0001.slcio jeremym@iris01.slac.stanford.edu:/afs/slac/g/lcd/public_data/ILC/test/mokka/ |
The user name jeremym should be replaced above with your real SLAC account name.
Test Commands
The GLITE UI will be used to run test jobs. It uses commands starting with "edg-" for job submission, monitoring, etc.
...
| No Format |
|---|
edg-job-status -i slic.jdljid |
Retrieve the output. By, default the job output will go into a directory in /tmp so we specify the current directory instead.
| No Format |
|---|
edg-job-get-output --dir `pwd` -i slic.jdljid |
Links
gLite User Guide
Virtual Data Toolkit (VDT)
CERN AFS UI Setup - setup instructions on lxplus@cern