...
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| DSHM | OTRS:LI20:3075:MOTR | -37200/-500 | in/out | ||
| FrontView | XPS:LI20:MC05 | Target Mount Horizontal | M2 | -65120/-150 | in/out |
| FrontView | XPS:LI20:MC05 | Target Mount Vertical | M1 | 80-20/80-20 | no change |
Ionizer/Shadowgraphy
...
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position |
|---|---|---|---|---|---|
| Target Assembly Vertical | XPS:LI20:MC05 | PB7 Target Mount Vertical | M1 | 80 | Clear in combination with horizontal |
| Target Assembly Horizontal | XPS:LI20:MC05 | PB8 Target Mount Horizontal | M2 | -150 | Clear in combination with vertical |
E320 assembly
Motor positions after rejigging MO (height change): http://physics-elog.slac.stanford.edu/facetelog/show.jsp?dir=/2022/35/31.08&pos=2022-08-31T17:05:58Attention: the alignment target can crash with multiple items. Please contact E-320 if you don't know the procedures.
| Desc | XPS Controller | Motor name | Channel | Position | Desc. position | Last update |
|---|---|---|---|---|---|---|
| USHM | XPS:LI20:MC03 | PB10 M2 Removal Stage | MC03, M1 | OAPs in: |
laser vector alignment: 0.5 (cross-check with 305 value above) | E-320 position: mirror on the right side of the e-beam, steering laser onto 1st OAP |
| April 30, |
| 2024 | ||||
Alignment Target Vertical UP/DOWN | XPS:LI20:MC10 | PB11 SFQED Target Vertical | MC10, M1 | 0 |
-9048. |
Home position, needed when inserting or retracting OAP assembly. Do not drive to home (0) when MO tower is in IN position.
/Clear position with and without OAP assembly. Moving assembly requires moving out of clear position.
35 | highest position / lowest position / out position when OAP is IN / YAG in position ATTENTION: collisions possible, follow exact procedure, check target position before moving OAPs / MO tower DON'T GO LARGER THAN 90 EVER http://physics-elog.slac.stanford.edu/facetelog/show.jsp?dir=/2024/17/24.04&pos=2024-04-24T23:48:34 | April 24, 2024 |
| MO Tower Mover IN/OUT | XPS:LI20:MC10 | PB12 SFQED Tower Mover | MC10, M2 | - |
95/0 | IN position to look at focal spot.
| December 14, 2022 | |
| OAP Assembly IN/OUT | XPS:LI20:MC10 | PB16 SFQED Assembly Removal | MC10, |
IN position to focus main beam. Clear (retracted), also home positions, needs MO Tower to move out first, also needs Alignment target to move upwards first | April 30, 2024 | |||||
| Elliptical mirror/M3 IN/OUT | XPS:LI20:MC10 | PB17 Elliptical mirror mover | MC10, M4 | Positive limit switch/negative limit switch + 7 | Out position. Configuration is 'SetCurrentPositionAsHome',so need to drive all the way to positive limit switch to ensure driven out. In position. Drive all the way to negative end for IN position. | |
| PB18 Focus Imaging Vertical | XPS:LI20:MC10 | PB18 Focus Imaging Vertical | MC10, M5 |
| 0. |
| 427 | Home at current position (0). Motor should not be touched or moved, should be clear in any case. | |||||
| Foils vertical mover | XPS:LI20:MC05 | MC05, M1 | needed only for beam-vector alignment (M1/M2) | November 8, 2023 | ||
| Foils horizontal mover | XPS:LI20:MC05 | MC05, M2 | needed only for beam-vector alignment (M1/M2) | November 8, 2023 |
December 14, 2022: http://physics-elog.slac.stanford.edu/facetelog/show.jsp?dir=/2022/50/14.12&pos=2022-12-14T23:59:00
April 24, 2024 E320 OAP swap and new motor positions: http://physics-elog.slac.stanford.edu/facetelog/show.jsp?dir=/2024/17/24.04&pos=2024-04-24T23:48:34
Safely retracting E-320 Safely retracting E320 assembly and setting up to clear e-beam/laser will be:
- Drive PB12 SFQED Tower Mover to 0 (home)
- Drive PB11 SFQED Target Vertical to 0 (home)
- Drive PB16 SFQED Assembly Removal to 0 (home)
- Drive PB11 SFQED Target Vertical to 9990
- Drive PB17 Elliptical mirror mover to most positive end
...