Page History

...

If not save your acquisition, you may want to see charge injection, and plot it live. In that case, you will need to enable the dataReceiver for that ASIC that you  want to see its charge injection results by opening the DisplayViewerX (X is 0 to 3, the ASIC that you study). You may want to collect dark by hitting the "Collect dark" button", hit some triggers to get images, then apply the dark by checking the "Apply dark" check box. You may want to set the contrast from -5000 to 5000 or use automatic contrast.

After that, go to root.App, then open the TestChargeInjection tab. You should see several parameters (defaults). If you want a range of columns, you need to insert the First and the Last Column index. For evaluating carriers, you can just choose columns 100 to 150. If you want a specific ASIC, insert the ASIC index (0 to 3). -1 will perform Charge injections for all ASICs. You can hit Start and wait until the progress bar shows done. Or you can stop the charge injection using the Stop button. See below

...