...
XPS | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||
---|---|---|---|---|---|---|---|---|---|---|
1 | Questar 1 H | Questar 1 V | Questar 2 H | Questar 2 V | BED 2 | BED 1 | ||||
2 | ||||||||||
3 | East XZ | East Y | East ZX | West XZ | West Y | West Z | Mono1_H (W) | X | Zyla 500m IMS500PP - labeled "no connect" | |
4 | Mono2_H (E) | Mono2_V (E) | VISAR Z |
Mono1_V (W) |
Mono1_H (W) | VISAR Y | VISAR X |
PR60 (EL 2/3) Stepper Motor Patch Panel - Proposed and As Implemented Use
...
Left (1) | (2) | (3) | (4) | (5) | (6) | (7) | Right (8) | |
---|---|---|---|---|---|---|---|---|
Upper | MEC:USR:MMS:17 tgX | MEC:TC1:MMS:26 ePix100a backward | MEC:TC1:MMS:22 ePix100a forward | MEC:USR:MMS:20 Filter Wheel Analyzer1_V | MEC:USR:MMS:21 Analyze_Z | MEC:USR:MMS:22 IMA Lens | MEC:USR:MMS:23 Not Used Analyzer1_H | MEC:USR:MMS:24 Not Used BAD! |
Lower | MEC:USR:MMS:25 Talbot Y Analyzer2_H | MEC:TC1:MMS:25 Turning Mirror L-R | MEC:USR:CLZ:01 Zyla Focus Analyzer2_V | MEC:USR:CLF:01 Zyla Vert Analyzer3_V | N/A | N/A | MEC:TC1:MMS:29 Turning Mirror U-D | MEC:TC1:MMS:23 Zyla Scint Analyzer3_H |
Motor Checklist
Purpose | Base PV | Connection | pmgr | python device | Cabled? | Verified/Homed? | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Standard Motors | ||||||||||||||
LPL Drive Lenses | ||||||||||||||
East_XZ | MEC:PPL:MMN:17 | T5/*1, XPS 3/1, ioc-mec-ppl-xps3 | Newport | east_xz | Yes | Yes | ||||||||
East_Y | MEC:PPL:MMN:18 | T5/*2, XPS 3/2, ioc-mec-ppl-xps3 | Newport | east_y | Yes | Yes | ||||||||
East_ZX | MEC:PPL:MMN:19 | T5/*3, XPS 3/3, ioc-mec-ppl-xps3 | Newport | east_zx | Yes | Yes | ||||||||
West_XZ | MEC:PPL:MMN:20 | T5/*4, XPS 3/4, ioc-mec-ppl-xps3 | Newport | west_xz | Yes | Yes | ||||||||
West_Y | MEC:PPL:MMN:21 | T5/*5, XPS 3/5, ioc-mec-ppl-xps3 | Newport | west_y | Yes | Yes | ||||||||
West_ZX | MEC:PPL:MMN:22 | T5/*6, XPS 3/6, ioc-mec-ppl-xps3 | Newport | west_zx | Yes | Yes | ||||||||
VISAR Lens | ||||||||||||||
VISAR_X | MEC:PPL:MMN:32 | VacCable 9, T6/DB25-1, AirCable "XPS DelayStage", XPS 4/8, ioc-mec-ppl-xps4 | Newport | visar_x | Yes | Yes | ||||||||
VISAR_Y | MEC:PPL:MMN:31 | VacCable 2, T6/DB25-2, AirCable "XPS2 #4", XPS 4/7, ioc-mec-ppl-xps4 | Newport | visar_y | Yes | Yes | ||||||||
VISAR_Z | MEC:PPL:MMN:28 | VacCable 10, T6/5, AirCable "XPS2 #3/XPS2 #1", XPS 4/3, ioc-mec-ppl-xps4 | Newport | visar_z | Yes | Yes | ||||||||
Target | ||||||||||||||
TC_hexapod | IOC:MEC:HEX1 | B4/L8 | Hexapod | pending
| Yes | Yes | ||||||||
Target_X | MEC:USR:MMS:17 | D2/D5 MF? moxa-mec-09:4001 (R62 E15), ioc-mec-usrppl-ims | PLS-85 Sample S | target_x | Yes | Yes | ||||||||
Beam Dump | ||||||||||||||
Zyla_500mm |
Now back to MEC:PPL:MMN:24 | in-air to beam dump,
XPS 3/8, ioc-mec-ppl-xps3 | Newport | zyla_z | Yes | Yes | ||||||||
JJ Slits Not in questionnaire 4 motors | ||||||||||||||
JJ Slits | MEC:TC1:MMS:[17,18] MEC:TC1:MMS:[01,02] | T5/2 and T5/8 | Yes | Yes | ||||||||||
Experiment Specific Motors | ||||||||||||||
Fast Diode Not in questionnaire 2 motors | ||||||||||||||
| ||||||||||||||
|
|
| ||||||||||||
Monochromator Translation From questionnaire: Mono_[XYZ] 3 motors: MECHome Spectrometer screen | ||||||||||||||
Mono XZ
| MEC:TC1:MMS:09 | D2/D5 MF? digi-mec-07:2111 (R64A E19), ioc-mec-tc1-xuv-ims | XUV X | mono_xz | Yes | Yes: to LLS and HLS. | ||||||||
Mono Y
| MEC:TC1:MMS:08 | D2/D5 MF? digi-mec-07:2110 (R64A E19), ioc-mec-tc1-xuv-ims | XUV Y | mono_y | Yes | Yes: to LLS and HLS. | ||||||||
Mono ZX
| MEC:TC1:MMS:07 | D2/D5 MF? digi-mec-07:2109 (R64A E19), ioc-mec-tc1-xuv-ims | XUV Z | mono_zx | Yes | Yes: to LLS and HLS. | ||||||||
Si (5 3 3) analyzers - Dumb Motors (H + V) From questionnaire: Analyzer[123]_[HV] 6 motors | ||||||||||||||
Analyzer1_H | MEC:USR:MMS:23 | T6/5?#1 Analyzer Cable #1 | Original, unused: VT-50-100 New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer1_h | Yes | Yes | ||||||||
Analyzer1_V | MEC:USR:MMS:2420 | T6/5?#1 Analyzer Cable #2 | Original, unused: Micronix_VT50 New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer1_v | Yes | Yes | ||||||||
Analyzer2_H | MEC:USR:MMS:25 | T6/4?#2 Analyzer Cable #3 Repurposed "Talbot Y" PR 60 patch panel connection. | Original: PLS85 In-Air New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer2_h | Yes | Yes | ||||||||
Analyzer2_V | MEC:USR:CLZ:01 | T6/4?#2 Analyzer Cable #4 Repurposed "Zyla Focus" PR 60 patch panel connection. | Original: Optique Peter Focus New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer2_v | Yes | Yes | ||||||||
Analyzer3_HV | MEC:USR:CLF:01 | D2zD2c/N D5 (verify feedthru) Analyzer Cable #5 Repurposed "Zyla Vert" PR 60 patch panel connection. | Original: Optique Peter Vertical New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer3_hv | Yes | Yes | ||||||||
Analyzer3_VH | MEC:TC1:MMS:23 | D2ZD2c/N D5 (verify feedthru) Analyzer Cable #6 Repurposed "Zyla Scint" PR 60 patch panel connection. | Original: Crystal Y New: Analyzer Faulhber_SA_15_8_141 config (under MEC VT50) with encoders and limit switches disabled. | analyzer3_vh | Yes | Yes | ||||||||
Si (5 3 3) analyzer1 - Z axis (VT 50) From questionnaire: Analyzer1_Z 1 motors | ||||||||||||||
Analyzer1_Z | MEC:USR:MMS:21 | VacCable 6, T5/6
| VT-50-100 | analyzer1_z | Yes | Yes | ||||||||
Channel cut tip/tilt - Newport (H + V) From questionnaire: Mono1_[HV], Mono2_[HV] 4 motors | ||||||||||||||
Mono1_H (W) | MEC:TC1PPL:MMSMMN:2229 | B5/B2 Newport 4 Port 6 | mono1_h (tip/tilt) | Yes | Yes | |||||||||
Mono1_V (W) | MEC:TC1PPL:MMSMMN:2230 | B5/B3 Newport 4 Port 5 | mono1_v (tip/tilt) | Yes | Yes | |||||||||
Mono2_H (E) | MEC:TC1PPL:MMSMMN:2225 | B5/B3 B4 Newport 4 Port 1 | mono2_h (tip/tilt) | Yes | Yes | |||||||||
Mono2_V (E) | MEC:TC1PPL:MMSMMN:2226 | B5/B5 Newport 4 Port 2
| mono2_v (tip/tilt) | Yes | Yes | |||||||||
ePix100 - Translation stage (VT50) From questionnaire: Detector[12]_Z 2 motors | ||||||||||||||
Detector1_Z (NorthForward) | MEC:TC1:MMS:22 | VacCable 5. T5/5
| VT-50-55 | detector1epix100f_z | Yes | Test lims. | ||||||||
Detector2_Z (SouthBackward) | MEC:TC1:MMS:26 | VacCable 4, T5/4
| VT-50-55 | detector2epix100b_z | Yes | Test lims. | ||||||||
Leftover channels used in Gregori L-10034 (Inventory of Newport and IMS cabling still in target chamber) |
|
|
|
|
|
|
Detectors Checklist (TBD)
Detectors Checklist (TBD)
Detector | DAQ alias | Connection | Cabled? | In DAQ? | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
epix10k-540k | quad_0 |
| Yes | Yes | ||||||||
epix10k-540k | quad_1 |
| Fiber only, no power. | No | Detector | DAQ alias | Connection | Cabled? | In DAQ?||||
epix10k-540k | quad_03 |
| Yes | Yes | ||||||||
ePix100 | SW Epix100a "epix100a_f" |
| Fiber:
Power: B3/Quad 0 | epix10k-540k | quad_2 | Details worked out with Detectors Group.
| epix10k-540k | quad_3 | Fiber:
Power: B3/Quad 3
| Yes | Yes | |
ePix100 | NE Epix100a "epix100a_b" | ePix100 (former bxrts) | epix100a_N_TBD | Planned:Fiber pair from Flange D2d, power from the South epix-PDU feedthru on B3.
| ePix100 (former xpcs) | epix100a_N_TBD |
| Yes | Yes Planned: Fiber pair from Flange B2 Quad 2 (#5/#6), power from North epix-PDU feedthru on B3. MTP to daq-mec-cam01 | |||
Andor Zyla | zyla | in-air USB/Fiber extender to daq-mec-cam02 | Yes | Yes | ||||||||
VISAR 1 | visar_1 | Network connection with Windows PC ioc-mec-visar1 | Yes | Yes Not tested right now since under regular use | ||||||||
VISAR_2 | visar_2 | Network connection with WIndows PC ioc-mec-visar2 | Yes | Yes Not tested right now since under regular use | ||||||||
Diode/Wave8 | PVs are:
| TBD | Yes | Yes: see
| ||||||||
Timing diode/QADC134 | PVs are:
| B3 ioc-mec-qadc. Timing fiber connected. Diode signal into A1 with SMA/Male - SSMC/Female Coaxial Jumper Cable and VLM-83-2W-S+ limiter. | Yes(verify) | Yes | ||||||||
XRT spectrometer | hxsss | N/A | N/A |