Page History

...

• Create the software image to upload (called the firmware by PPS, hpm1fw.img) by make hpm

• From the same network as the shelf manager (currently cds), execute:

  No Format
  ipmitool-pps -I lan -H shlfmgr02 -t 0x86 -b 0 -A NONE hpm upgrade hpm1fw.img activate

   

  • -H shlfmgr02 is the hostname of the Shelf Manager
  • -t 0x86 is the IPMB address of the COB you are upgrading
  • hpm1fw.img is the path to the software image file created by make hpm

...

Here's a couple that will probably be useful:

• To activate deactivate the payload (initiate M1M4->M2 >M5 transition):

  Code Block
  language none
  ipmitool-pps -I lan -H shlfmgr02 -t 0x86 -b 0 -A NONE picmg policy set 0 2 10

• To deactivate activate the payload (initiate M4M1->M5 >M2 transition):

  Code Block
  language none
  ipmitool-pps -I lan -H shlfmgr02 -t 0x86 -b 0 -A NONE picmg policy set 0 1 0

...

• Reset commands over console:

  Code Block
  language none
  [B8 00 0D 0A 40 00 XX] XX = 00 current mode = 01 normal mode = 02 standalone mode = 03 manual standalone So: [B8 00 0D 0A 40 00 00] [B8 00 0D 0A 40 00 01] [B8 00 0D 0A 40 00 02] [B8 00 0D 0A 40 00 03]

• Reset

  Non-volatile

  Parameters

  and

  Reboot

  (will

  cause

  INIT

  callbacks

  to

  execute)

  Code Block
  language none
  [B8 00 41 0A 40 00]

• Set Handle Switch

  Code Block
  language none
  [B8 00 08 0A 40 00 00 XX] 00 = Open 01 = Closed 02 = Hardware Switch So: [B8 00 08 0A 40 00 00 00] [B8 00 08 0A 40 00 00 01] [B8 00 08 0A 40 00 00 02]

• Reset the SDR repository

  Code Block
  language none
  [B8 00 33 0A 40 00]

...