Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

We routed the connections in the server area of the Klystron Gallery that corresponded to the radiation monitors in beam dump area of the tunnel table to a server module so that we can access the live radiation readings from S20 trailer.

There are four radiation monitors placed near cameras near the end of the FACET-2 II tunnel so that they can tell us which areas around the beam dump area are potentially hazardous for cameras.

We placed a dosimeter near each RADFET to serve as a callibration device.  A fifth dosimeter is kept as a control in my desk drawer (B52-315B.26).

(TLDR: Added DOSFET to controls network)

See network info at bottom of page.


Neutron Detector

As of the August 8th PAMM, we've temporarily added a neutron detector near CHER.  See picture below.

Locations

RADFETS

Image AddedImage AddedImage AddedImage Added

Neutron Detector

Image Added

Old Pictures:

Image AddedImage AddedImage AddedImage Added

Image Added



Cable Connections in Tunnel

Image Added

Server Room Connections

Klystron Gallery server area near S20 trailer

FKG20-20FKG20-2335FKG20-24

Image Added

Image Added
Image Added

Network Info:

Name:                         RADF-LI20-1                        radm-li20-rm01
IP:                                172.27.76.21
VLAN :                         FACETINST        (719)
MAC:                           00:80:A3:A1:81:0B
Added to DHCP:          Yes
Location:                     FKG20-2335

...

Port :                            2/0/38, (Switch 2, port 38)

Data Readout:

To sign into facet-srv01 from FastX:

  1. ssh mcclogin
  2. Enter password
  3. ssh fphysics@facet-srv01
  4. Select account
Just RADFETSAll Radiation Measurements
  1. facethome
  2. LI20 – Experimenter
  3. Click on "RadFET" button in lower right corner
  4. If needed click on "Config" in top right
  1. facethome
  2. LI20 – Experimenter
  3. "PyDM View All Doses"