Page History
Table of Contents |
---|
About this version of CSPad alignment
- Sensors in quads are aligned individually (see CSPad Alignment of quads for cxi80410-r0628) using their natural coordinates as from the optical measurement (top-left corner is an origin, nearest point to the beam spot).
- Quads are rotated and inserted in uniform 2-D array with appropriate offsets.
Earlier versions of CSPad alignment
CSpad Alignment - v2011-05-25
CSPad Alignment of quads - v2011-06-14
CSPad Alignment of quads for cxi80410-r0628
Alignment tool
- Takes image of CSPad or quad from 2-D array
- Draw lines along the wire shadows
- Interactively adjust lines along the wire shadows
- Plots:
- image
- image profile
- deviation of the shadow "center of gravity" from line along the line
Alignment parameters
2011-05-25 CSPad alignment parameters
Alignment of sensors in quads
See CSPad Alignment of quads for cxi80410-r0628 for sensor position parameters in quads.
...
Code Block |
---|
self.quadInDetOrient = [180, 90, 0, 270]
|
Quad corner X and Y coordinates (in pixel)
Code Block |
---|
off = 30
gapX = 0
gapY = 0
shiftX = 18
shiftY = 18
quadXOffset = [ off+0-gapX+shiftX, off+ 0+1-gapX-shiftX, off+834+0+gapX-shiftX, off+834+0+gapX+shiftX]
quadYOffset = [ off+0-gapY-shiftY, off+834-3+gapY-shiftY, off+834-0+gapY+shiftY, off+ 0+2-gapY+shiftY]
|
Deviation of the wire shadows from lines
Large plots are for tilted ASICs, icons for non-tilted.
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
- non-tilted ASICs
Overview
Content Tools