...
The following is a digest of the T9 runs. Get the full list or the selected run from the pipeline or elogbook. (WORK IN PROGRESS).
In red color : Not to be used, due to mistake, or for specialist.
In blue color the runs numbers good for the statistics
Last run taken into account : 12901334
Summary of the Digest
CU Position 01 (0°)
| Electron | Full Brem | Tagged |
---|---|---|---|
0.5 GeV | 20k (1204) |
| 275 k (1244-1258) |
1 GeV | 20k (1205) |
| 125 125 k (1208-1210) |
1.5 GeV |
|
| 50 k(1332, 1334) |
2.5 GeV | 60k (1201-1202 ) | 2,5 M (1181-1190) | 100 100 k (1177-1180) |
CU Position 1 2 (30°)
| Electron | Full Brem | Tagged | ||
---|---|---|---|---|---|
0.5 |
|
| 125k(1295, 1297-1300) | ||
1. GeV | 100k (1220) |
| 105 105 k (1214-1217) | ||
1.5 GeV |
|
|
| ||
2.5 |
| 2.5 |
| 2.5 M(1223-1231) | 105k (1233-1237) |
CU position 2 3 (50°)
| Electron | Full Brem | Tagged |
---|---|---|---|
0.5 | |
| 75 k+85 k =160 k |
1. | |
| 100k (1276-1279) |
1.5 |
|
|
|
2.5 | | 200k (1262-1271) | 100k (1272-1275) |
Electron runs
CU Position 4 (145°) x=749, y=0, z= -175 -215°
| Electron | Full Brem | Tagged |
---|---|---|---|
0.5 |
|
| 35k(1329-1330) |
1. |
|
| 50K (1319-1320) |
2.5 |
| 2Mo (1312-1318) |
|
Electron runs
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
1201 | 11/8 | e- | |||||
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
1201 | 11/8 | e- | 2.5 | BT1 | 0° |
| av rate 34 HZ, CU instant rate 500 hz. S0 counts 21k per spîll |
1202 |
| e- | 2.5 | BT1 |
|
| 3 phasing errors for 30k events. run stopped due to beam off |
1204 | 11/8 | e- | 0.5 | |
|
| 20k |
1205 | e- | 1. | S0:14 k count per spill | ||||
1218-1219 | 11/08 | e- | 1. |
| 30° (x,y,z)=(200,13.2,-48) | no | Accidentally started runs in synchronized Run Control. These were automatically aborted by the program. |
1220 | 22h06 | e- | 1. | BT1 | idem | No | 100K, S0 new trigger, S4 off |
1221 | 22h20 | e- | 1. | BT1 | Idem | YES | Refrence point before changing momentum |
1239 | 12/08 | e- | .5 |
| idem |
| 500 MeV electron with magnet off to check dump position with electron beam.9K |
1240 |
| .5 |
| idem |
| 500 MeV electron with magnet off to check dump position with electron beam. | |
1259 | 12/8 | e' | 1. |
|
|
| 1. Gev with magnet off |
1260 | 12/8 |
| 2.5 |
|
|
| magnet off, 2.5 GeV electrons to check beam and CU positions |
1261 | 12/8 |
| 2.5 |
|
|
| Magnet Off |
...
Runs | Date | particle | energy | IMagnet | CU configuration | CU position | AD | notes | |
---|---|---|---|---|---|---|---|---|---|
1176 |
| tagged g | 3GeV | 600 | BT1 | 0 degrees, center of tower 2 | yes | events in twr3? | |
1177-1180 |
| tagged g | e beam at 2.5GeV | 600 | BT1 | 0 degrees, center of tower 2 | yes | magnet ON, 25K evts per run | |
1206 |
| tagged gamma | e- 1GeV | 240 |
| idem |
| S0:14k count per spill | |
1207 | 11/8 | tagged gamma |
| 240 |
| idem |
| idem with S1 in the trigger | |
1208 | 11/8 11h34 | tagged gamma | e- | 240 |
| idem | yes | New trigger S3 in veto - 25k | |
1209 | 11/8 | tagged gamma | e- | 240 |
| idem | yes and no | around 30k : SYNCHRONIZATION LOST ! | |
1210 | 11/8 | tagged gamma | e- | 240 |
| idem | yes | Synchronized Tagged gamma with 1GeV electron beam, going for 70k to get all the statistic : 100Kevents | |
1211-1213 | 11/8 | Tagged | 1 GeV | 180-240 | BT1 | 30° (x,y,z)=(200,13.2,-48) | | various Magnet currents for setting up | |
1214 | 11/8 | Tagged | e 1 GeV | 240 | BT1 | 30° (x,y,z)=(200,13.2,-48) |
| 25k | |
1215 |
| Tagged | e 1GeV | 240 | BT1 | idem |
| 25k | |
1216 |
| Tagged | e 1 GeV | 240 | BT1 | idem |
| 25K | |
1217 | 11/8 | Tagged | e- 1 GeV | 240 | BT1 | idem |
| 30k | |
1232 | 12/08 | Tagged | e- 2.5 GeV | 600 | BT1 | 30° (x,y,z)=(200,13.2,-48) |
| Not to be used , S4 not in the Trigger | |
1233-1237 | 12/8 | Tagged | e- 2.5 | 600 | BT1 | idem |
|
| |
1242 | 12/8 |
| e- 0.5 GeV | 100 |
| 0 degrees, center of tower 2 |
| GeometryVerifiation | |
1243 |
| Tagged | e- 0.5 GeV | idem |
| 0 degrees, center of tower 2 | yes | rate too low | |
1244-1245 | 12/08 | Tagged | e- 0.5 GeV | 120 |
| 0 degrees, center of tower 2 | yes |
| |
1246-1250 | 13:57 | Tagged | e- 0.5 GeV | 120 |
| 0 degrees, center of tower 2 | yes and no | Sync lost after 6476 evts | |
1253-1258 |
| tagged | e 0.5gev | 120 |
| 0 degrees, center of tower 2 | yes |
| |
1272 | 13/8 | Tagged | e 2.5 GeV | 600 | 48° | Table moved to 48 deg, in order to allow full calrecon |
| ||
1273-1275 | 13/8 | Tagged | e 2.5 GeV | 600 |
| 48° |
| table@(-50,12.3,-48, 48deg) |
|
1276-1279 | 13/8 | Tagged | e 1GeV | 240 |
| 48 |
| idem |
|
1287-1289 | 13/8 | Tagged | e 0.5 | 120 |
| 48° | Table(-50,12.3,-48, 48deg) |
| |
1290 |
|
|
|
|
|
|
| Junk |
|
...
1291- |
...
Runs
...
Date
...
particle
...
energy
...
I(Magnet)
...
CU configuration
...
CU position
...
AD
...
notes
...
1181-1190
...
8/8
9/8
...
e+g
...
2.5
...
600
...
BT1
...
0 degrees, center of tower 2
...
no
...
overall 2M evts - (false report of 300 A for 1185 in elogBook)
...
1222
...
11/8
...
2.5 GeV
...
0
...
30° (x,y,z)=(200,13.2,-48
...
yes
...
check beam position
...
1223-1231
...
12/8
...
e+g
...
2.5 GeV
...
600
...
BT1
...
idem
...
no
...
rate stable after adjustement in run 1223
2.5 Mevents
...
1262-1271
...
13/8
<3:02
...
e+g
...
2.5
...
600
...
...
50°
...
...
...
...
...
...
...
...
...
...
...
Tagger calibration runs
...
Runs
...
Date
...
particle
...
energy (GeV)
...
CU configuration
...
CU position
...
AD
...
notes
...
1148-1164; 1166-1169
...
8/8
...
e beam
...
various
...
BT1
...
0 degrees, various positions to align with tagger
...
yes
...
many different configurations, for expert only
...
1170
...
...
e beam
...
1.5
...
BT1
...
0 degrees, center of tower 2
...
yes
...
dump in place, slits at 51.5
...
1171
...
...
e beam
...
1.25
...
BT1
...
0 degrees, center of tower 2
...
yes
...
magnet current 600A, direct tagger calibration
...
1172
...
...
e beam
...
1.125
...
BT1
...
0 degrees, center of tower 2
...
yes
...
magnet current 600A, direct tagger calibration-NOT Synchronised
...
1173
...
...
e beam
...
1.375
...
BT1
...
0 degrees, center of tower 2
...
yes
...
magnet current 600A, direct tagger calibration, slits reduce to 51
...
1174
...
8/8
...
e beam
...
1.125
...
BT1
...
0 degrees, center of tower 2
...
yes
...
magnet current 600A, direct tagger calibration
...
1282
...
13/8
...
e
...
BT1
...
48°,
...
Test - - Tagger calibration
Trigger is standard : S0.S2.S4.C1.C2.veto(S3+Sh)
Magnet Current set to 300A to shoot the beam directly in the Tagger.
300A is not enough trying to go up to 320A and then to 350A and then to 400A
400A is OK, Stopping run and start the Good On
1294 | 13/8 | Tagged | e 0.5 | 120 |
| 48° | 85 k |
| |
1295, | 13/8 | Tagged | e 0.5 | 120 |
| 30 ° |
| 25k |
|
1297-1300 | 13/8 | Tagged | ie 0.5 | idem |
| 30° |
| 100 k |
|
1303 | 13/8 | Tagged | e 0.5 | idem |
| 30° |
| 25k |
|
1304 | 13/8 | Tagged | e 0.5 | 120 |
| 30° |
| 12 k . Rinsing number of events out of Sync |
|
1305 | 13/8 | Tagged | e 0.5 | 120 |
| 30° |
| 25k |
|
1308-1309 | 14/8 | Tagged | e 1GeV | 240 |
| 48° |
| 50K |
|
1310-1311 | 14/8 | Tagged | e 1 GeV | 240 |
| 30° |
| 50k |
|
1319-1320 |
| Tagged | 1 GeV | 240 |
| Pos 4, 145° | Yes | 50k. |
|
1321 | 14/8 |
|
|
|
| idem | Yes and no | sync lost after ?? |
|
1327-1328 | 14/8 | Tagged | 1 GeV | 240 |
| idem | Yes | 50k |
|
1329-1330 | 14/8 | Tagged | 0.5 GeV | 120 |
| Pos 4, 145° | yes | 35k |
|
1331 |
|
| 1.5 GeV | 360 |
| Pos 1, 0° | No | test beam position, no sync |
|
1332 | 14:27 | Tagged | 1.5 GeV | 360 |
| Pos 1, 0° | Yes | 25k |
|
1333 |
| Tagged | 1.5 | 360 |
| same | yes and no | no sync after <3600 evts |
|
1334-1335 | 14/8 | Tagged | 1.5 GeV | 360 |
| Same | yes | 50 k |
|
1336, 1337 |
|
|
|
|
| same |
| sync lost afyer 1733 and 1280 evts |
|
...
1283
...
13/8
...
e
...
1 eEV
...
BT1
...
...
...
400 A
...
1284
...
13/8
...
e
...
0.75
...
BT1
...
...
...
330 A Synchronization Lost from the beginning...
...
1285
...
13/8
...
e
...
0.75 GeV
...
BT1
...
...
...
Magnet Current = 330A
All 4 Si tagger chamber are fully populated.
...
1286
...
13/8
...
e
...
.5
...
...
...
...
Magnet current @ 120 A
Pressure of C1 = 0.9 bars, C2=0.97 bars
Beam shut down after 18553 events
...
CAL calibration runs
Runs | particle | energy | CU configuration | CU position | AD | notes | |||
---|---|---|---|---|---|---|---|---|---|
1338 |
| ||||||||
|
|
|
| same |
| 25k |
| ||
1339-1342 |
|
|
|
|
| Pos 2 |
| 100k |
|
1343-1346 |
|
|
|
|
|
|
|
|
|
...
Full-brem Photon runs
Runs | Date Date | particle | energy | I(Magnet) | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|---|
1165 1181-1190 | 8/8 |
|
| BT22(S3 only) |
|
| pedestal | |
1191 | 9/8 8h51 | - | - | BT22 (S3 only) | - | - | monitor pedestal shift | |
1198 | 10/8 |
|
| BT22 |
|
| pedestal T ~22.3C | |
1201 | 11/8 |
|
| BT22 |
|
| Pedestal T~ ? | |
1281 | 13/8 |
|
|
|
|
| Pedestal- Trigger is now only S0 and the beam is off...have only muons deviated by the magnet. |
ACD Calibration runs
9/8 | e+g | 2.5 | 600 | BT1 | Pos 1 : 0 degrees, center of tower 2 | no | overall 2M evts - (false report of 300 A for 1185 in elogBook) | |
1222 | 11/8 | 2.5 GeV | 0 | Pos 2 : 30° (x,y,z)=(200,13.2,-48 | yes | check beam position | ||
1223-1231 | 12/8 | e+g | 2.5 GeV | 600 | BT1 | idem | no | rate stable after adjustement in run 1223 |
1262-1271 | 13/8 | e+g | 2.5 | 600 |
| pos 3 : 50° |
|
|
1312-1318 | 14/8 |
| 2.5 | 600 |
| Pos 4 : 145 ° |
| 2 Mevents |
Tagger calibration runs
Runs | Date | particle | energy (GeV) | Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|---|---|---|---|
1148-1164; 1166-1169 | 8 | 1192, 1193 | 9/8 | e beam cosmic | various |
|
|
|
| ||
1194-1197 | 10/8 | cosmic |
| BT3 |
|
|
|
Sil Calibration runs
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
4318 | 11/8 |
|
|
|
|
|
|
Not to be used
BT1 | 0 degrees, various positions to align with tagger | yes | many different configurations, for expert only | |||||||
1170 |
| e beam | 1.5 | BT1 | 0 degrees, center of tower 2 | yes | dump in place, slits at 51.5 | |||
1171 |
| e beam | 1.25 | BT1 | 0 degrees, center of tower 2 | yes | magnet current 600A, direct tagger calibration | |||
1172 |
| e beam | 1.125 | BT1 | 0 degrees, center of tower 2 | yes | magnet current 600A, direct tagger calibration-NOT Synchronised | |||
1173 |
| e beam | 1.375 | BT1 | 0 degrees, center of tower 2 | yes | magnet current 600A, direct tagger calibration, slits reduce to 51 | |||
1174 | 8/8 | e beam | 1.125 | BT1 | 0 degrees, center of tower 2 | yes | magnet current 600A, direct tagger calibration | |||
1282 | 13/8 | e | BT1 | 48°, | Test - - Tagger calibration | |||||
1283 | 13/8 | e | 1 eEV | BT1 |
|
| 400 A | |||
1284 | 13/8 | e | 0.75 | BT1 |
|
| 330 A Synchronization Lost from the beginning... | |||
1285 | 13/8 | e | 0.75 GeV | BT1 |
|
| Magnet Current = 330A | |||
1286 | 13/8 | e | .5 |
|
|
| Magnet current @ 120 A |
|
CAL calibration runs
Runs | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAL pedestal runs
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
1165 | 8/8 |
|
| BT22(S3 only) |
|
| pedestal |
1191 | 9/8 8h51 | - | - | BT22 (S3 only) | - | - | monitor pedestal shift |
1198 | 10/8 |
|
| BT22 |
|
| pedestal T ~22.3C |
1201 | 11/8 |
|
| BT22 |
|
| Pedestal T~ ? |
1281 | 13/8 |
|
|
|
|
| Pedestal- Trigger is now only S0 and the beam is off...have only muons deviated by the magnet. |
1348 | 14/8 |
|
| BT 22 |
|
| 5k |
ACD Calibration runs
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
1192, 1193 | 9/8 | cosmic |
|
|
|
|
|
1194-1197 | 10/8 | cosmic |
| BT3 |
|
|
|
Sil Calibration runs
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
4318 | 11/8 |
|
|
|
|
|
|
Cosmic run
Runs | Date | particle | energy | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|
1307 |
|
|
|
|
|
| muons to check light leak |
Not to be used
Runs | Date | particle | energy | IMagnet | CU configuration | CU position | AD | notes |
---|---|---|---|---|---|---|---|---|
1200 | 11/8 | e- | 2.5 | 0 |
|
|
| ? Control Room ajustingSpill structure during run |
1203 | 11/8 | e- | 0.5 | 0 |
|
| | S0 = 13k/spill, wrong focus setting |
1238 | 12/8 |
|
|
|
|
|
| Software test |
1241 | 12/8 |
|
|
|
|
|
| Software test |
1280 | 13/8 |
|
|
|
|
|
| Test run for CU CAL pedestals - JUNK |
1296 |
|
|
|
|
|
|
| Junk |
1301-1302 |
|
|
|
|
|
|
| Junk |
1322-1326 |
|
|
|
|
|
|
| junk |
1347 |
|
|
|
|
|
|
| first run to prepare positron setting of tonight |
1349-1354 |
|
|
|
|
|
|
| to check a lead brick position that should simulate the MMS.
|
Runs | Date | particle | energy | IMagnet | CU configuration | CU position | AD | notes |
1200 | 11/8 | e- | 2.5 | 0 |
|
|
| ? Control Room ajustingSpill structure during run |
1203 | 11/8 | e- | 0.5 | 0 |
|
| | S0 = 13k/spill, wrong focus setting | 9 mrad on XY 12 mrad on XZ |
1238 | 12/8 |
|
|
|
|
|
| Software test |
1241 | 12/8 |
|
|
|
|
|
| Software test |
1280 | 13/8 |
|
|
|
|
|
| Test run for CU CAL pedestals - JUNK |