...
- Beam line optimization stuff goes here!
- Changing Absorption Edges / Calibrating at BL 4-3
- Windowing with WebGe at 4-3
- CALVERT calibration paddle positions
- 4 = calibration paddle out (make sure it is set to this when collecting on sample!)
- about 37.5 = calibration paddle in (photodiode spectrum plotted as I2/I0 or DIODE/I0)
- can run an alignment scan of CALVERT vs I2 near 37.5 to find signal maximum
Software
- Data Collection:
- Detector Windowing: xMapGUI
- Instrument Control System (ICS)
- Connecting to the Xspress3 detector electronics server
Beam Line Computer: s043lx1.slac.stanford.edu
...